DSC-WX300 (serv.man2) - Sony Digital Camera Service Manual (repair manual). Page 16

DSC-WX300_L2

1-13

(5)  Push the Linear Cam Barrel to protrude it to the object side so that the Drive Gear Barrel can be held.
(6)  Pull down the Drive Gear Barrel to the maximum.
(7)  Turn the Drive Gear Barrel clockwise to the maximum.

 

Drive Gear Barrel

Object side

Linear Cam Barrel

(8)  Remove the flexible board from the hole of the Fixed Barrel.
(9)  Set the lens unit in the retracted state.

 

Hole of the
Fixed Barrel

Flexible Board

(10)   Detach the Fixed Barrel while further turning the gear counterclockwise with a flat-blade screwdriver or a similar flat tool.

 

 

Gear

Fixed Barrel

Core unit_1

(11)   Detach the Core unit_2 from the Linear Cam Barrel and the Drive Gear Barrel.

 

 

Linear Can Barrel,
Drive Gear Barrel

Core unit_2

(12)   Turn the Linear Cam Barrel to set it at position A, and then detach the Linear Cam Barrel from the Drive Gear Barrel.

 

 

Liner Cam Barrel

Drive Gear Barrel

Liner Cam Barrel

Rounded cutout

Edge of gear

A

(13)  Turn the rear edge of Core unit_2 counterclockwise to set it in the state shown below.
(14)  Release the three claws beside the bosses with tweezers or the like to detach the 1st Cam Barrel Assy,1st Group Assy.

Note: When releasing the claws, push out the 1st Cam Barrel Assy with tweezers and lift the claws.

1

2

1

2

Bosses

Claws

Claw

Core unit_3

Hook

Hooks

Claw

Hook

Rear edge of
Core unit_2

1st Cam Barrel Assy,
1st Group Assy

Boss

Push out the 1st Cam
Barrel Assy.

Tweezers

Lift the claw.

Tweezers

(15)  Turn the 1st Group Assy clockwise to detach it.

 

 

1st Cam Barrel Assy

1st Group Assy

1st Group Assy