Read Sony DSC-W830 Service Manual online
DSC-W830
4-8
Installation
1
Install the DC Motor Worm Assy to the Stationary Tube Assy with two screws.
2
Solder the DC Motor Worm Assy onto the Flexible Board at two locations.
Screws
Flexible Board
DC Motor Worm Assy
Stationary Tube Assy
Solders
3
Turn the Gear in the arrow direction to extend the lens barrel slightly.
4
Turn portion A in the arrow direction to TELE end.
5
Install the GearWorm Wheel, Gear A, and Gear B.
Gear
A
Gear A
Gear B
Gear Worm
Wheel
Wheel
6
Install the Rear Mirror Plate.
7
Tighten the four screws in the order of numbers in the figure below.
8
Apply a voltage of 2.5 V to the DC Motor and retract the Lens.
Screws
Screw
Rear Mirror
Plate
Plate
2
4
3
1
Click on the first or last page to see other DSC-W830 service manuals if exist.