Read Sony DSC-W830 Service Manual online
DSC-W830
4-5
4-3-3. Complementary Information
(1) Installation Method of Battery Terminal Board
Fold the notch 3 or 4 times repeatedly to break.
Remove the notch.
Solder the battery terminal board on the SY-1035
Board.
∗ Battery terminal board is attached with
notch for installation.
Board.
∗ Battery terminal board is attached with
notch for installation.
Remove the battery terminal board by
bending the claw of rock portion.
When assembling the battery terminal board,
replace it with new one because battery
terminal board will be bent.
bending the claw of rock portion.
When assembling the battery terminal board,
replace it with new one because battery
terminal board will be bent.
Notch
Solder Position
(reflow soldering )
(reflow soldering )
Notch
SY-1035 Board
Battery terminal board
Notch
Battery terminal
board
board
SY-1035 Board
(2) Multi Connector (Rec) 8P Soldering Position
(3) Precaution During Speaker Installation
Solder Position
Solder Position
Route the speaker harness as shown below.
(4) Precaution During Cabinet (Rear) Assy Installation
When assembling, adjust the switch and Knob position.
Speaker
Harness
Harness
Rib
Cabinet (Rear) Assy
SW-1002 Board
Switch
Knob
Multi Connector
(Rec) 8P
(Rec) 8P
Click on the first or last page to see other DSC-W830 service manuals if exist.