Read Sony DSC-W630 (serv.man2) Service Manual online
DSC-W630_L2
1-3
– ENGLISH –
1-6. PROCESS AFTER FIXING FLASH ERROR
When “FLASH error” (Self-diagnosis Code E : 91 : 01) occurs, to prevent any abnormal situation caused by high voltage, setting of the flash is changed
automatically to disabling charge and flash setting.
After fixing, this setting needs to be deactivated. Flash error code can be initialized by the operations on the HOME screen.
automatically to disabling charge and flash setting.
After fixing, this setting needs to be deactivated. Flash error code can be initialized by the operations on the HOME screen.
Method for Initializing the Flash Error Code
Initialize
Initializes the setting to the default setting.
Even if you execute this function, the images are retained.
Even if you execute this function, the images are retained.
1. MENU
(Settings)
(Main Settings)
[Initialize]
[OK]
Note
Be sure not to turn off the camera while initializing.
1-7. DEDICATED A/V CABLE (OPTIONAL ACCESSORY)
Dedicated A/V cable is not supplied with this model.
For details of the dedicated A/V cable, refer to the Note 1 on the “ACCESSORIES”.
For details of the dedicated A/V cable, refer to the Note 1 on the “ACCESSORIES”.
1-5-3. Self-diagnosis Code Table
Self-diagnosis Code
Symptom/State
Correction
Repaired by:
Block
Function
Detailed
Code
C
1
3
0
1
The internal memory has experienced a me-
dia error.
dia error.
Turn the power off and on again.
The internal memory has experienced a for-
mat error.
mat error.
Format the internal memory.
Memory card is unformatted.
Format the memory card.
Memory card is broken.
Insert a new memory card.
Memory card type error
Insert a supported memory card.
The camera cannot read or write data on the
memory card.
memory card.
Turn the power off and on again, or taking out and inserting the memory
card several times.
card several times.
C
3
2
0
1
Trouble with hardware
Turn the power off and on again.
E
9
1
0
1
Abnormality when flash is being charged.
Checking of flash unit or replacement of flash unit. (Note)
Note: After repair, be sure to perform “1-6. PROCESS AFTER FIXING FLASH ERROR”.
Click on the first or last page to see other DSC-W630 (serv.man2) service manuals if exist.