Read Sony DSC-W630 (serv.man2) Service Manual online
DSC-W630_L2
3-1E
3. ASSEMBLY
Assembly-1: Installation Methode of Battery Terminal Board.
Fold the notch 3 or 4 times repeatedly to break.
Remove the notch.
Solder the battery terminal board on the SY-309
Board.
* Battery terminal board is attached with
notch for installation.
Board.
* Battery terminal board is attached with
notch for installation.
Remove the battery terminal board by
bending the claw of rock portion.
When assembling the battery terminal board,
replace it with new one because battery
terminal board will be bent.
bending the claw of rock portion.
When assembling the battery terminal board,
replace it with new one because battery
terminal board will be bent.
Notch
Solder Position
(reflow soldering )
(reflow soldering )
Notch
SY-309 Board
Battery terminal board
Notch
Battery terminal
board
board
Assembly-2: Multi Connector (Rec) 8P Soldering Position.
SY-309 Board
SY-309 Board
Multi Connector
(Rec) 8P
(Rec) 8P
Solder Position
Solder Position
Guide Line
Guide Line
Assembly-3: Precaution During Speaker Installation.
Route the speaker harness as shown below.
Speaker
Harness
Harness
Rib
Assembly-4: Installation Cautions of LCD Cushion (740) and
LCD Window (670).
Apply LCD cushion (740).
And have the Tab of the Release Paper and peel it off.
And have the Tab of the Release Paper and peel it off.
Attach Cabinet (Rear) Assy to set.
Fit LCD Window (670) into the flame of Cabinet (Rear)
Assy and attach it on LCD Cushion (740).
Assy and attach it on LCD Cushion (740).
Tab
Release
Paper
Paper
Align corner of
LCD cushion (740)
with corner of LCD.
LCD cushion (740)
with corner of LCD.
LCD Cushion (740)
LCD
Cabinet (Rear) Assy
Cabinet (Rear) Assy
LCD Window (670)
LCD Cushion (740)
Blow the air before attaching.
Be sure to keep away from dust.
Be sure to keep away from dust.