Read Sony DSC-W620 Service Manual online
DSC-W620
3-12
Linear guide ring
The inner-block_3
To this groove
The phase of
FPC portion
FPC portion
The phase of
two cut portions
two cut portions
Keep holding three pins.
Keep holding the shutter assy.
Assembled
(The inner-block_2)
(The inner-block_2)
8. Align the linear guide ring with the inner-block_3 as shown in the figure.
9. Assemble the linear guide ring with the inner-block_3 as the inner-block_2 as shown in the figure.
If the linear guide ring does not fit completely, retry while keeping the three pins and the shutter assy in the arrow
directions.
directions.
DRIVE BARREL
LINEAR CAM BARREL
Assembled DRIVE BARREL
& LINEAR CAM BARREL
& LINEAR CAM BARREL
The only thin projection
should be located around
this phase.
should be located around
this phase.
The phase of drive gear portion
The inner-block_1
The inner-block_2
United DRIVE BARREL
& LINEAR CAM BARREL
& LINEAR CAM BARREL
< Reference >
At this point, if the DRIVE BARREL & LINEAR CAM BARREL have been separated, assemble them as
shown in the figure.
shown in the figure.
10. Assemble the inner-block_2 with the united DRIVE BARREL & LINEAR CAM BARREL as the inner-block_1 as
shown in the figure.
Click on the first or last page to see other DSC-W620 service manuals if exist.