Read Sony DSC-W520 Service Manual online
DSC-W520
3-9
DRIVE CAM BARREL
The shutter assy
To this cam
groove
groove
Rear view of Aligning
The phase of drive
gear portion
gear portion
Assembled
(The inner-block_4)
(The inner-block_4)
1. Align the shutter assy with the DRIVE CAM BARREL as shown in the figure.
2. Assemble the shutter assy and the DRIVE CAM BARREL by turning the shutter assy approx. 120 degree in the arrow
direction to move it to the position shown below.
3-5. Assembling
Front view of the
front barrel part
front barrel part
The inner-block_4
The phase of drive
gear portion
gear portion
The phase of
FPC portion
FPC portion
This cut portion should be located
around only this phase.
around only this phase.
To this cam
groove
groove
Aligned
The front
barrel part
barrel part
Assembled
(The inner-block_3)
(The inner-block_3)
The inner-block_4
3. Align the front barrel part with the inner-block_4 as shown in the figure.
4. Assemble the front barrel part and the inner-block_4 by turning the front barrel part in the arrow direction to move it to
the position shown below.
the position shown below.
Click on the first or last page to see other DSC-W520 service manuals if exist.