Read Sony DSC-W35 (serv.man4) Service Manual online
6-4
DSC-W35_ADJ
1-1. Adjusting items when replacing main parts and boards
When replacing main parts and boards, adjust the items indicated by z in the following table.
Note 1:
The Automatic Adjustment Program does not support the “Initialization of data”. Perform it manually.
Note 2:
Use the AWB Adjustment Program (W35W55AwbAdjustment.exe).
Note 3:
When replacing the SY-175 board, erase the data in internal memory of the board before replacement.
Note 4:
When replacing the SY-175 board, perform “VIDEO OUT Default Data Check” and “Initial Language Data Check” after re-
placement.
placement.
Table 6-1-1
Replaced parts
Board
replacement
replacement
replacement
Adjusting item
Adjustment
LCD unit
Backlight unit
(AF illumination LED)
(CCD signal process, Timing gen.)
(Video amp.)
LCD901
D901
D003
IC301
IC602
Flash unit
LCD block
LCD block
ST-133 board
SY-175 board
SY-175 board
ST-133 board
SY-175 board
VIDEO adjustment
Video output level adj.
z
z
CAMERA adjustment 1
Flange back adj.
z
z
z
CAMERA adjustment 2
Flange back check
z
z
z
Color shade adj. & check
F No. compensation
Measure gain adj.
Mechanical shutter adj.
Light value adj.
(Note 2)
AWB 3200K-5800K standard data input
z
z
z
Color reproduction adj. & check
CCD linearity check
CCD white defect compensation check
CCD black defect compensation check
CAMERA adjustment 5
Strobe adj.
z
z
z
z
z
CAMERA adjustment 6
Auto focus illumination check
z
z
z
V-COM adj.
White Balance adj.
(Note 1)
Initialization of data
(COMPLETE)
(COMPLETE) (Note 3, 4)
z
z
z
CAMERA adjustment 4
CAMERA adjustment 3
z
z
LCD adjustment
z
z
z
Block
Mounted parts
Lens block
CCD block assy (Including CD-604 flexible board and CCD imager)
z
Click on the first or last page to see other DSC-W35 (serv.man4) service manuals if exist.