Read Sony DSC-W35 (serv.man4) Service Manual online
6-1
DSC-W35_ADJ
SECTION 6
ADJUSTMENTS
Before starting adjustments
Precaution on Replacing the SY-175 Board
• The Repair Board has already been adjusted. Re-initialization or EVR data copy from the set before repair is not
required.
• Perform “VIDEO OUT Default Data Check” and “Initial Language Data Check” mentioned below, and also the
adjustment items necessary after SY Board replacement.
VIDEO OUT Default Data Check
When you replace to the repairing board, the written data of repairing board also might be changed to original setting
because of broadcast system (NTSC/PAL).
When the data has changed because of board replacing etc., check the default data of VIDEO OUT if destination code is
right. If not, rewrite to the right value.
because of broadcast system (NTSC/PAL).
When the data has changed because of board replacing etc., check the default data of VIDEO OUT if destination code is
right. If not, rewrite to the right value.
VIDEO OUT Default Data
Writing Method:
1) Select page: 00, address: 01, and set data: 01.
2) Select page: 4F, address: 8D, and set data: 00 (NTSC) or data: 01 (PAL).
3) Select page: 40, address: 38, and set data: 00.
4) Click [Save] on the SEUS screen.
5) Select page: 80, address: 34, and check that the data is “00”.
6) Select page: 80, address: 30, and check that the data is “00”.
7) Select page: 00, address: 01, and set data: 00.
1) Select page: 00, address: 01, and set data: 01.
2) Select page: 4F, address: 8D, and set data: 00 (NTSC) or data: 01 (PAL).
3) Select page: 40, address: 38, and set data: 00.
4) Click [Save] on the SEUS screen.
5) Select page: 80, address: 34, and check that the data is “00”.
6) Select page: 80, address: 30, and check that the data is “00”.
7) Select page: 00, address: 01, and set data: 00.
Address
8D
Page
4F
Data
NTSC
00
PAL
01
Click on the first or last page to see other DSC-W35 (serv.man4) service manuals if exist.