DSC-W30, DSC-W40 (serv.man4) - Sony Digital Camera Service Manual (repair manual). Page 3

6-1

DSC-W30/W40_ADJ

• The Repair Board has already been adjusted. Re-initialization or EVR data copy from the set before repair is not

required.

• Perform “VIDEO OUT Default Data and Exif Model Data Check” and “Initial Language Data Check” mentioned

below, and also the adjustment items necessary after SY Board replacement.

When you replace to the repairing board, the written data of repairing board also might be changed to original setting.
When the data has changed because of board replacing etc., check the data setting (VIDEO OUT Default Data, Exif
Model Data) is right. If not, rewrite to the right value.

Writing Method:
1) Select page: 00, address: 01, and set data: 01.
2) Select page: 4F, address: 8D, and set the VIDEO OUT Default Data.
3) Select page: 8F, address: E5 and E6, and set the Exif Model Data.
4) Click [Save] on the SEUS screen.
5) Select page: 80, address: 34, and check that the data is “00”.
6) Select page: 80, address: 30, and check that the data is “00”.
7) Select page: 00, address: 01, and set data: 00.

Address

8D

Page

4F

Data

NTSC

00

PAL

01

Address

E5

E6

Page

8F

8F

Data

DSC-W30

33

30

DSC-W40

34

30