Read Sony DSC-W30 / DSC-W40 (serv.man2) Service Manual online
2-8
DSC-W30/W40_L2
2-2-4. ADHERE THE ORNAMENTAL RING A
Apply an adhesive to four recesses on the top surface of the Barrier Assy.
*
*
Do not apply too much adhesive. (Make quantity of adhesives into the quantity in which a groove hides.)
Meeting a “notch” of the Ornamental Ring A with a “projection” of the group-1 frame, push the Ornamental Ring A into the group-1 frame.
*
*
The projection of the spring for preventing static electricity must be tilted.
Put the 60g weight on the Ornamental Ring A so that the Ornamental Ring A does not float up until the adhesive hardens.
Note:
Be careful not to give a shock.
*
After the weight was put, no gap must be present in full circumference between Ornamental Ring A and group-1 frame.
A gap, if present, causes the crackle sound NG.
A gap, if present, causes the crackle sound NG.
*
The weight must push in the Ornamental Ring A only.
If the weight is put on the mold part of the Barrier Assy, the Ornamental Ring A will float up.
If the weight is put on the mold part of the Barrier Assy, the Ornamental Ring A will float up.
Completion after 30 minutes.
Adhesive
Adhesive
Do not put the weight on a black mold part.
Not gap in full circumference.
Ver. 1.6 2010.02
The changed portions from
Ver. 1.5 are shown in blue.
Ver. 1.5 are shown in blue.
Click on the first or last page to see other DSC-W30 / DSC-W40 (serv.man2) service manuals if exist.