Read Sony DSC-W210 / DSC-W215 (serv.man2) Service Manual online
2-11E
DSC-W210/W215_L2
2-5-3. FINAL INSPECTION (NO FAULT IN ACTUAL MOTION/ACTUAL SCREEN)
1
Zoom motion (Check five postures: horizontal, upward/downward, upper/lower oblique 45
˚
)
No abnormal sound or motion must be found over full stroke between TELE end and WIDE end.
2
Zoom image
No abnormality such as a skipped image or wavy image must be found in the image through LCD or finder over full stroke between
TELE end and WIDE end.
No abnormality such as a skipped image or wavy image must be found in the image through LCD or finder over full stroke between
TELE end and WIDE end.
3
Barrier (Check five postures: horizontal, upward/downward, upper/lower oblique 45
˚
)
The barrier must be opened and closed fully, free from a sticking in the midway.
No abnormal sound must be heard during the operation.
No abnormal sound must be heard during the operation.
4
Appearance condition
Scratches or stains must not be noticeable, except that the customer permits them.
Scratches or stains must not be noticeable, except that the customer permits them.
5
Foreign matters on the lens
The lens condition must not be worse than that when the camera was received from the customer.
The lens condition must not be worse than that when the camera was received from the customer.
Lens at TELE end
Upward
Downward
Horizontal
Upper oblique 45˚
Lower oblique 45˚
Lens at WIDE end
Turn power on.
After the check,
turn power off.
After the check,
turn power off.
Full
stroke
check
stroke
check
The changed portions from
Ver. 1.0 are shown in blue.
Ver. 1.0 are shown in blue.
Ver. 1.1 2009.02
Click on the first or last page to see other DSC-W210 / DSC-W215 (serv.man2) service manuals if exist.