Read Sony DSC-TX55 (serv.man2) Service Manual online
DSC-TX55_L2
3-1
3. ASSEMBLY
Assembly-1: The Method of attachment of RL-114
Flexible Board.
1
Fold dotted line parts of the RL-114 flexible
board as shown in figure.
board as shown in figure.
2
Attach the RL-114 flexible board as shown in figure.
3
Route the RL-114 flexible board as shown in figure.
Mountain fold
RL-114 Flexible Board
Mountain fold
Valley fold
Valley fold
Mountain fold
Rib
Rib
Boss
Boss
Assembly-2: Precaution During of Lens Flexible
Board Removing.
Note on assembling (About the work to the battery)
Connector
Very weak
Connector
Pickup this part
Lens Flexible Board
Very weak
Do not hold the following part and remove Lens
flexible board.
flexible board.
Hold the Lens Block as shown figure.
CD-829 Board
Sensor
Motor
Lens
Very weak
Very weak
Very weak
Very weak
Motor
Very weak
Do not hold the following part.
Assembly-3: Caution for Handling the Lens Device.
• IR cut coating surface
The red coating is reflected.
• The other surface
The red coating is
not reflected.
not reflected.
• Side view
The red belt
is seen.
is seen.
Lens Device side
Lens Device side
Hold it with tweezers or the like.
Optical Filter Block
[IR Cut Coated Side]
[The Other Side]
The one side of the Optical Filter Block has treated
How to distinguish the side of Optical Filter Block
facing to Lens Device.
facing to Lens Device.
with IR cut coating.
Mount the Optical Filter Block facing the IR cut
coated side to the lens device.
Distinguish the IR cut coated side from the other by
applying the fluorescent light to
the Optical Filter Block in the dark place
(cut off the outside light).
Mount the Optical Filter Block facing the IR cut
coated side to the lens device.
Distinguish the IR cut coated side from the other by
applying the fluorescent light to
the Optical Filter Block in the dark place
(cut off the outside light).
Click on the first or last page to see other DSC-TX55 (serv.man2) service manuals if exist.