DSC-T500 (serv.man3) - Sony Digital Camera Service Manual (repair manual). Page 10

6-9

DSC-T500_ADJ

When the Automatic Adjustment Program started, the Main Menu
screen in Fig. 6-1-10 will appear. On this screen, select each ad-
justment section.

1

[Connecting the Equipment] button
A connection diagram of the equipment is displayed.

2

[CONNECT] button
The SeusZ starts to make the set in the connected state.
Upon successful connection, the operation of the buttons 4 –
qa

 is enabled.

3

[END] button
The Automatic Adjustment Program is finished.

4

[INTERNAL MEMORY $Write Enable%] button
The “INTERNAL MEMORY (Write Enable)” screen appears.

5

[DESTINATION DATA WRITE] button
The “DESTINATION DATA WRITE” screen appears.

6

[USB SERIAL N0. INPUT] button
The “USB SERIAL No. INPUT” screen appears.

7

[VIDEO SYSTEM ADJUSTMENT] button
The “VIDEO SYSTEM ADJUSTMENT” screen appears.

8

[CAMERA SYSTEM ADJUSTMENT] button
The “CAMERA SYSTEM ADJUSTMENT” screen appears.

9

[LCD SYSTEM ADJUSTMENT] button
The “LCD SYSTEM ADJUSTMENT” screen appears.

0

[SERVICE MODE] button
The “SERVICE MODE” screen appears.

qa

[DATA BACKUP] button
The “DATA BACKUP” screen appears.

qs

This part indicates the version of Automatic Adjustment Pro-
gram.

qd

[Adjust item] button
“Adjusting items when replacing main parts and boards” table
is displayed.

The DSC-T500 is adjusted by the Automatic Adjustment Program.
The Automatic Adjustment Program enters automatically via the
SeusZ the adjustment operations that were formerly entered manu-
ally by the adjustment remote commander (some items may be
adjusted by manual operation on the operation screen of the SeusZ).

1) The Automatic Adjustment Program writes the adjustment re-

sults such as EVR data to the set through two-way communi-
cation with the camera via the SeusZ. Accordingly, the Auto-
matic Adjustment Program must be used in the environment
where the SeusZ operates.

2) The Automatic Adjustment Program cannot be used when the

SEUS, SeusCam, or SeusEX is running. Exit the SEUS,
SeusCam or SeusEX before using the Automatic Adjustment
Program.

3) The SeusZ must be already started on the PC when using the

Automatic Adjustment Program. With the SeusZ not started,
some adjustment items will take time in adjustment.

4) The program run time may vary depending on the environ-

ment of the personal computer used.

Double-click the application file (DSC-T500 Auto-Adj
Ver_1.1r02.exe), and the Automatic Adjustment Program will start.

3

5

4

7

6

2

1

qd

0

qa

8

9

qs