DSC-T1 (serv.man3) - Sony Digital Camera Service Manual (repair manual). Page 22

Read Sony DSC-T1 (serv.man3) Service Manual online

DSC-T1
6-20
1-5-3.
Adjusting Method
[Automatic Adjustment Program execution items and
sequence]
1. LCD Initial Data Input
2. Data Setting during LCD Adj.
3. VCO Adj.
4. Bright Adj.
5. Contrast Adj.
6. V-COM Adj.
7. White Balance Adj. (1)
8. White Balance Adj. (2)
9. Release of Data Setting during LCD Adj.
[Adjusting method]
1) Click the 
[LCD Adjustment Start]
 button.
2) The Automatic Adjustment Program executes the items from
“1. LCD Initial Data Input” to “5. Contrast Adj.”.
3) Upon successful completion of the “5. Contrast Adj.”, the fol-
lowing message is displayed during execution in “6. V-COM
Adj.”. On the SEUS screen, operate the UP/DOWN key so
that the brightness of portions A and B on the LCD panel is
equal. After the adjustment, click the 
[OK]
 button.
Fig. 6-1-41
4) Upon completion of “6. V-COM Adj.”, “7. White Balance Adj.
(1)” is executed. The following message is displayed, and then
check that LCD screen is not colored.
If colored, change the data of page: 8F, address: 28 and 2A on
the SEUS Operation screen to adjust so that the LCD screen is
not colored.
Fig. 6-1-42
5) If the 
[OK]
 button is clicked, “8. White Balance Adj. (2)” and
“9. Release of Data Setting during LCD Adj.” will be executed.
Fig. 6-1-43
SEUS operation screen
Fig. 6-1-44
Check on the LCD screen (V-COM Adj.)
Fig. 6-1-45
UP/DOWN key
A
A
A
A
B
B
B
B
Page of 30
Display

Click on the first or last page to see other DSC-T1 (serv.man3) service manuals if exist.