Read Sony DSC-S980 (serv.man2) Service Manual online
5-6
DSC-S980_ADJ
5-2-3. Zoom Adjustment
The Zoom Over Run/Focus Back Lash adjustment order is as follows.
Perform the zoom adjustment in the condition the camera stands up in the horizontal plane.
Adjusting in the other condition causes the malfunction of the zoom adjustment.
Adjusting in the other condition causes the malfunction of the zoom adjustment.
Adjustment order
Screen display
The adjustment is finished normally.
Fig. 5-2-17
The adjustment is finished abnormally.
Fig. 5-2-18
Fig. 5-2-19
Fig. 5-2-20
The adjustment is complete.
Malfunction of Zoom adjustment
Malfunction of Zoom adjustment
Focus section
Focus section
Malfunction of Zoom adjustment
Zoom section
Zoom section
Set the unit to the adjustment mode.
* For the setting procedure of the adjustment mode, refer to Page 5-2.
Place the camera in the horizontal plane.
Press the control button “V”, then Zoom Adjustment starts.
Confirm the indication
on the screen.
Finished normally.
Finished abnormally.
In case of the adjustment is finished normally.
the adjustment completion indication appears
on the screen. (Fig. 5-2-17)
Turn off the power to quit the adjustment mode.
the adjustment completion indication appears
on the screen. (Fig. 5-2-17)
Turn off the power to quit the adjustment mode.
In case of the adjustment is finished abnormally.
the following indication appears on the screen.
(Fig. 5-2-18 to 5-2-20)
In this case, confirm the adjusting environment
and readjust.
the following indication appears on the screen.
(Fig. 5-2-18 to 5-2-20)
In this case, confirm the adjusting environment
and readjust.
O Zoom Station Passed
X
Zoom Adjust NG
X
Focus backlash NG
X
Focus backlash NG
X
Zoom Adjust NG
Click on the first or last page to see other DSC-S980 (serv.man2) service manuals if exist.