DSC-S980 (serv.man2) - Sony Digital Camera Service Manual (repair manual). Page 11

5-10

DSC-S980_ADJ

Save “lang.txt” document in the root directory of Memory Stick PRO Duo used.
The content of “lang.txt” as follows:

Language destination (for example: U2) (enter key)
Product ID (10 bit) (enter key) (Refer to “5-3. PRODUCT ID LIST”)
S/N (7 bit) (enter key)

Now as DSC-S980 silver camera U2 Lang Destination setting for the lang.txt document example.

U2
0048870534
0120243

1.

The enter key must be the end symbol each row.

2.

The product ID refer to “5-3. PRODUCT ID LIST”. And the product ID must be 10 bit. If the product ID less than 10
bit, add 0 before the product ID.

3.

The S/N must be 7 bit. It refer to the serial number of shipment.

Adjustment order

Set the unit to the adjustment mode.

* For the setting procedure of the adjustment mode, refer to Page 5-2.

Press “Shutter button”, then Set Lang Destination starts.

Confirm the indication

on the screen.

Finished normally.

Finished abnormally.

In case of the adjustment is finished normally. 
the adjustment completion indication appears 
on the screen. (Fig. 5-2-32)
Turn off the power to quit the adjustment mode.

In case of the adjustment is finished abnormally. 
the following indication appears on the screen.
(Fig. 5-2-33)
In this case, confirm the adjusting environment 
and readjust.

Screen display

The adjustment is finished normally.

The adjustment is complete.

The adjustment is finished abnormally.

  

Lan:XXX NTSC Des:XXX

Set LangDestination OK!

Set LangDestination 

  

Read Language NG!

The screen above is an example.

Malfunction of Set language
destination.
In case of the set language desti-
nation is failed, reset the lan-
guage destination.