DSC-S60, DSC-S80, DSC-S90, DSC-ST80 (serv.man7) - Sony Digital Camera Service Manual (repair manual). Page 3

— 3 —

DSC-S60/S80/S90/ST80_L2

4

Throw in each gear of the new Motor Unit, Zoom, and fix with two screws.
* Lens barrel should not be pulled out.
* Do not touch the motor directly for preventing rust. (Use finger cot etc...)
* Be careful not to damage the appearance.

5

Solder of “Zoom motor terminal” (4 point).
* Be careful for terminal deformation and breaking of coil.

6

Assemble lens to the unit.

7

Execute the necessary adjustment items referring to Service Manual, ADJ.

8

Final inspection
8-1. Zoom function
* Confirm five position. (refer to the picture)
* Make sure if there is no mechanical noise and illegal motion when zooming (From TELE end to WIDE end).
8-2. Zooming picture
* Make sure if there is no missing frame or unstable pictures in LCD or EVF.
8-3. Barrier
* Confirm five position. (refer to the picture)
* Make sure if it moves smoothly without any interference, and does not have abnormal sound.
8-4. Appearance
* Make sure if there is no scratch or dirt on the surface unless customers permit.
8-5. Dust on lens
* Make sure if there is no dust in the lens.

Zoom Motor Unit

Two Screws

Solder

Lens stored

Lens at TELE end

Upward

Downward

Horizontal

Upper oblique 45˚

Lower oblique 45˚

Full stroke check