DSC-S500 - Sony Digital Camera Service Manual (repair manual). Page 5

1-1

DSC-S500

Initializes the setting to the default setting.

1 Select [OK] with v on the control button, then press z.

The message “Initialize all settings Ready?” appears.

2 Select [OK] with v, then press z.

The settings are reset to the default setting.

• Make sure that the power is not disconnected during resetting.

OK

See the following procedure.

Cancel

Cancels the resetting.

Copies all images in the internal memory to a “Memory Stick Duo”.

1

Insert a “Memory Stick Duo” having 16 MB or larger capacity.

2 Select [OK] with v on the control button, then press z.

The message “All data in internal memory will be copied Ready?” appears.

3

Select [OK] with v, then press z.
Copying starts. 

OK

See the following procedure.

Cancel

Cancels the copying.

Use batteries with enough capacity or the AC Adaptor (not supplied). If you attempt to copy image files
using batteries with little remaining charge, the batteries may run out, causing copying to fail or possibly
corrupting the data.
You cannot copy individual images.
The original images in the internal memory are retained even after copying. To delete the contents of the
internal memory, remove the “Memory Stick Duo” after copying, then execute the [Format ] command in
        Internal Memory Tool.
You cannot select a folder copied on a “Memory Stick Duo ”.
The setting of          (Print order)marks is not copied even when you copy data.

•

•

•

•

•

The data can be copied/erased by the operations on the Setup screen. (When erasing the data, execute formatting the internal memory.)

When replacing the camera, erase the data in internal memory of the board before replacement.

This item does not appear when a “Memory Stick Duo” is inserted in the camera.
The default settings are marked with 

.

Formats the internal memory.

• Note that formatting irrevocably erases all data in the internal memory, including even protected images.

1

Select [OK] with v on the control button, then press z.
The message “All data in internal memory will be erased Ready?” appears.

2

Select [OK] with v, then press z.
The format is complete.

OK

See the following procedure.

Cancel

Cancels the formatting.