Read Sony DSC-S40 (serv.man4) Service Manual online
6-20
DSC-S40
1-4-3.
Adjusting Method
[Automatic Adjustment Program execution items and
sequence]
1. EVR Data Write
2. System Reset
3. Data Setting during LCD Adj.
4. V-COM AC Adj.
5. V-COM Adj.
6. White Balance Adj.
7. Release of Data Setting during LCD Adj.
sequence]
1. EVR Data Write
2. System Reset
3. Data Setting during LCD Adj.
4. V-COM AC Adj.
5. V-COM Adj.
6. White Balance Adj.
7. Release of Data Setting during LCD Adj.
[Adjusting method]
1) Click the
1) Click the
[Start]
button of the LCD Adjustment.
2) The Automatic Adjustment Program executes the items from
“1. Data Setting during LCD Adj.” to “4. V-COM AC Adj.”.
3) Upon successful completion of the “4. V-COM AC Adj.”, the
following message is displayed during execution in “5. V-COM
Adj.”. On the SEUS screen, operate the UP/DOWN key so
that the brightness of portions A and B on the LCD panel is
equal. After the adjustment, click the
Adj.”. On the SEUS screen, operate the UP/DOWN key so
that the brightness of portions A and B on the LCD panel is
equal. After the adjustment, click the
[OK]
button.
Fig. 6-1-37
4) Upon completion of “5. V-COM Adj.”, “6. White Balance Adj.”
is executed. The following message is displayed, and then check
that LCD screen is not colored.
If colored, change the data of page: 8F, address: 42 and 43 on
the SEUS Operation screen to adjust so that the LCD screen is
not colored.
that LCD screen is not colored.
If colored, change the data of page: 8F, address: 42 and 43 on
the SEUS Operation screen to adjust so that the LCD screen is
not colored.
Fig. 6-1-38
5) If the
[OK]
button is clicked, “7. Release of Data Setting dur-
ing LCD Adj.” will be executed.
6) Upon successful completion of all item the LCD Adjustment,
the following message is displayed. Click the
[OK]
button.
Fig. 6-1-39
SEUS operation screen
Fig. 6-1-40
Check on the LCD screen (V-COM Adj.)
Fig. 6-1-41
UP/DOWN key
A
B
Click on the first or last page to see other DSC-S40 (serv.man4) service manuals if exist.