DSC-S1900, DSC-S2000, DSC-S2100 (serv.man2) - Sony Digital Camera Service Manual (repair manual). Page 2

DSC-S1900/S2000/S2100_ADJ

5-2

Note1:
Use the fully charged Nickel-Metal Hydride batteries.

Note2:
For the chart, search “J-6082-563-A” in the JIG & Software on ESI homepage, download the PDF file and print out it on the A4 size whitepaper.

Connect the equipments as shown below.

When replacing these parts, adjust the items indicated by “z” in the following table.

Adjustment

Replaced parts 

CCD block

Lens block

Main board

Iris/Mechanical  Shutter/Bad  Pixel 
Adjustment

z

z

z

Zoom Adjustment

z

z

Far Focus Adjustment

z

z

z

Near Focus Adjustment

z

z

z

White Balance Adjustment

z

z

Set Language Destination

z

Note1:
Save the firmware file in the root directory of Memory Stick PRO Duo. 
Saving it in the other directory causes the malfunction of program.

Note2:
The firmware file is downloadable from the ESI homepage.

Preparations:
First, format the Memory Stick PRO Duo before copying the firmware.
When formatting, perform on the PC, using the FAT. Do not format on the unit.
If the concealed file “MEMSTICK.IND” exists, delete it.
Decompress the file and confirm the file format as shown below.

 

Adjusting firmware file for DSC-S1900: A3521C.bin

 

Adjusting firmware file for DSC-S2000: SDCA352C.bin

 

Adjusting firmware file for DSC-S2100: SDCC350C.bin

Save the file in the root directory of Memory Stick PRO Duo.
And also save the file of “lang.txt” in the root directory Memory Stick PRO Duo when replacing Main board. 
Refer to [5-2-7. Set Language Destination] for “lang.txt”.
This Memory Stick PRO Duo saved the firmware is used in the adjustments.

Adjustment mode:
1. With the camera turned OFF, set the Mode switch to “ 

 (Still image)” and insert the Memory Stick PRO Duo with the firmware files into the 

Memory Stick slot of the camera.

2. While pressing the “   (Delete)” button, press the “ON/OFF (Power)” button and release when the ON/OFF (Power) lamp and the LCD display 

turns on. Release the “   (Delete)” button when the ON/OFF (Power) lamp and the LCD display goes out.

3. After a few seconds, the LCD display will turn white and then show the Adjustment mode screen.

Pushing “MENU” button, the adjustment is finished makes to return to the initial screen display for adjustments.

To continue the adjustment, preform the operations mentioned from the next page.

When all adjustments are completed, just simply remove the power from the unit completes the adjustment procedure.

HR 15/51:HR6 (size AA)
Nickel-Metal Hydride batteries

Note: Use the fully charged Nickel-Metal

Hydride batteries.

Memory Stick PRO Duo
(256 MB or more)

DSC-

S1900

/ S2000 / S2100 Bottom Side

J-5

Small pattern box
PTB-1450
J-6082-557-A

J-4

Chart
(Note2)

J-6

HR 15/51:HR 6 (size AA)
Nickel-Metal Hydride
batteries (× 2) (Note1)

Camera table

J-6082-384-A

J-1

SONY
Memory Stick PRO Duo
(256 MB or more)

J-2

Mini flange back jig
J-6082-719-A

or

Flange back
adjustment jig
J-6082-563-A

The changed portions from
Ver.1.0 are shown in blue.