DSC-RX100M4 (serv.man2) - Sony Digital Camera Service Manual (repair manual). Page 78

1.

Match the 1st Group Press Block of the 1 Group Frame Block Assy with the cabinet number of the 3 Group Frame
Block Assy and install the 1 Group Frame Block Assy while turning it clockwise.

• If Ornamental Ring (A) and Barrier Block Assy is installed to 1 Group Frame Block Assy, remove them first.
• Be careful not to lose the 1st Group Press Block.
• When installing the 1 Group Frame Block Assy, stop turning it when the convex parts of the 1st Group Press

Block and the 3 Group Frame Block Assy match.

1st Group Press Block

3 Group Frame Block Assy

Cavity number

1 Group Frame Block Assy

2.

Install the Straight Tube Block Assy matching its cabinet number with the flexible boards position of the 3 Group
Frame Block Assy.

Cavity number

Straight Tube Block Assy

Flexible boards

1st/2nd/3rd group assy

Gap

3.

After turning the Straight Tube Block Assy counterclockwise about eight degrees to fully install it, turn the Straight
Tube Block Assy clockwise to the maximum extent to fit the bayonet.

Straight Tube Block Assy

About 8

°

DSC-RX100M4

4-30