Read Sony DSC-RX100M3 (serv.man2) Service Manual online
DSC-RX100M3_L2
3-1E
3. ASSEMBLY
Assembly-1: Notes on installing the FP-2234 Flexible Board
Note: If do not arrange it correctly, the flash may not open and
shut normally.
Arrange the FP-2234 Flexible Board as shown in the figure.
FP-2234 Flexible Board
Lens Cushion Upper
Lens Cushion Lower
Assembly-2: Notes on installing the Lens Ring
1. Set the Lens Ring so that its character part faces in the same direction
as the XX mark on the Manual Ring Block.
2. Attach the Lens Ring while aligning its concave with the convex of the
Manual Ring as shown in the figure.
as the XX mark on the Manual Ring Block.
2. Attach the Lens Ring while aligning its concave with the convex of the
Manual Ring as shown in the figure.
3. Turn the Lens Ring approx. 20 degrees clockwise to attach it.
Lens Ring
Lens Ring
Manual Ring Block
XX mark
Convex
Assembly-3: Notes on assembling the VF Sub Assy (Service)
Mountain fold
Valley fold
Valley fold
VF Sub Assy (Service)
EV-1010 Board
VF Sub Assy (Service)
Assembly-4: Notes on assembling the ST-1023 Flexible Board
Mountain fold
Valley fold
Valley fold
ST-1023 Flexible Board
Assembly-5: Notes on assembling the Base Holder Launch
EV-1010 Board
Base Holder Launch
Bosses
Click on the first or last page to see other DSC-RX100M3 (serv.man2) service manuals if exist.