DSC-RX10 (serv.man2) - Sony Digital Camera Service Manual (repair manual). Page 5

DSC-RX10_L2

1-2

When the CD-847 Flexible Board (Imager) is mounted to the lens, shift and tilt adjustment is made with Spacer Plates.
When removing the CD-847 Flexible Board, pay attention to the following.

(1)  When the lens is not replaced
 

Example: In the case of disassembly, cleaning, or replacement of the CD-847 Flexible Board (Imager)

•  Check and record the size of the built-in three Spacer Plates and store them so as not to lose them.
•  When assembling the CD-847 Flexible Board, be sure to install the Spacer Plates to their original locations.

Size

0.xx

Note
Be careful not to lose the Spacer Plates.
If any Spacer Plate is lost or their previous positions are not sure, repeatedly take a photo and check that there is no local defocus. 

is needed.

(2)  When the lens is replaced

•  Check the size of the built-in three Spacer Plates. If the thickness of a Spacer Plate is not 

0.30

, discard the Spacer Plate.

•  Prepare three Spacer Plates 

C

 (t = 

0.30

) (Sony Part No.: 

4-437-388-01

) and install them to the new lens.

0.30

Perform the following procedure to check the Wi-Fi function.

Required equipment: Windows personal computer with Wi-Fi interface

1.  Turn on the power of the unit.
2.  Perform the following operations.
 MENU 

→   → [Ctrl w/ Smartphone] → ●

3.  When preparation for Wi-Fi has been completed, the following screen opens and a password for Wi-Fi connection is displayed.

Ctrl w/ Smartphone

Operate smartphone to connect to

this device via Wi-Fi.

Enter

SSID DIRECT-XXXX:DSC-XXXX
Password XXXXXXXX
Device Name DSC-XXXX

Cancel

4.  Confirm on the personal computer that the unit is detected as a connectable wireless network.
5.  To further confirm that the unit is connectable, connect the unit to the personal computer and select “Network and Internet” → “Manage Wireless 

Networks” from Control Panel to open the network connection list. The unit is included in the list.

The changed portions from
Ver. 1.0 are shown in blue.