Read Sony DSC-R1 (serv.man4) Service Manual online
6-3
DSC-R1_ADJ
Replaced parts
Block
Mounted parts
Board
replacement
replacement
replacement
Adjusting item
Adjustment
LCD unit
Back light unit
EVF unit
Back light unit
(AF illumination LED)
(AFE, A/D conv.)
(Camera PreDSP, Timinng generator)
(Camera DSP)
(Video amp.)
(EVF driver)
(LCD driver)
LCD901
D901
LCD902
D902
D001
IC101
IC102
IC301
IC302
IC201
IC201
(COMPLETE)
(COMPLETE)
(COMPLETE) (Note 3)
Lens block
C MOS block assy (Including CD-588 board and C MOS imager)
Flash unit
LCD block
LCD block
EVF block
EVF block
AF-103 flexible
SY-132 board
SY-132 board
SY-132 board
SY-132 board
SY-132 board
PD-259 board
AF-103 flexible
PD-259 board
SY-132 board
VIDEO adjustment
Video output level adj.
z
z
z
z
CAMERA adjustment 1
Flange back adj.
z
z
z
CAMERA adjustment 2
Flange back check
z
z
z
CAMERA adjustment 3
Differencal gain adj.
z
z
z
z
(Note 2)
Color shading adj. & check
z
z
z
z
F No. compensation
Measure gain adj.
Mechanical shutter adj.
Light value adj.
C MOS low temp. dark def.
C MOS low temp. FD def.
C MOS HL def.
C MOS OF def.
Three continuous def. check
AWB adj. & check
z
z
z
z
Liner matrix adj.
z
z
z
z
CAMERA adjustment 6
C MOS linearity check
z
z
Strobe adj.
Auto focus illumination check
C MOS high temp. dark & FD Def.
Three continuos def. check
C MOS blinking def.
VCO adj.
Contrast adj.
V-COM adj.
White balance adj.
VCO adj.
Contrast adj.
White balance adj.
(Note 1)
Initialization of data
z
CAMERA adjustment 8
z
CAMERA adjustment 7
z
z
z
CAMERA adjustment 5
z
z
z
z
z
z
z
z
z
z
LCD adjustment
z
z
z
z
z
z
z
z
z
EVF adjustment
z
z
z
z
z
(Note 2)
CAMERA adjustment 4
z
1-1. Adjusting items when replacing main parts and boards
When replacing main parts and boards, adjust the items indicated by z in the following table.
Note 1:
The automatic Adjustment Program does not support the “Initialization of data” . Perform it manually.
Note 2:
Use the Color Adjustment Program (R1ColorAdjustment.exe).
Note 3:
When replacing the SY-132 board, perform “VIDEO OUT Default Data Check” after replacement.
Note 4:
To detect a high temperature defect in the CAMERA Adjustment 8, the camera must be aged for more than 30 minutes at the
temperature 40
temperature 40
°
C to 45
°
C. (For the aging environment, see “4. Prepareation of Aginng Environment” (page 6-8).)
Table 6-1-1
Click on the first or last page to see other DSC-R1 (serv.man4) service manuals if exist.