Read Sony DSC-QX100 Service Manual online
DSC-QX100
4-10
(3) Linear Guide Tube (B) and Cam Tube Replacing Method
Screw
Zoom Gear Assy
Screw
Z Retainer
Screw
Screw
Flexible board (focus)
Connector
Sensor
Be careful so that the Rear Tube
Mirror Block is not caught.
Mirror Block is not caught.
Rear Tube Mirror Block
3. Remove the screw and the Zoom Gear Assy.
4. Remove the three screws and the Z Retainer.
5. Remove the Sensor.
5. Remove the Sensor.
6. Peel the adhesive tape.
7. Disconnect the flexible board (focus) from the connector.
8. Remove the Rear Tube Mirror Block.
7. Disconnect the flexible board (focus) from the connector.
8. Remove the Rear Tube Mirror Block.
Adhesive tape
Removal
1. Disconnect the LF-2050 Flexible Board from the connector.
2. Disengage the LF-2049 Flexible Board from the hook.
1. Disconnect the LF-2050 Flexible Board from the connector.
2. Disengage the LF-2049 Flexible Board from the hook.
Hook
Connector
LF-2050
Flexible Board
Flexible Board
LF-2049
Flexible Board
Flexible Board
Click on the first or last page to see other DSC-QX100 service manuals if exist.