Read Sony DSC-QX100 Service Manual online
DSC-QX100
4-7
4-4. LENS BLOCK
4-4-1. Removal and Installation
(1) Ornamental Ring A or Barrier Assy Replacing Method
Installation
Removal
5. Disengage the four claws and remove the Barrier Assy.
1. Fit the four claws while inserting the Barrier Lever into the hole and attach the Barrier Assy.
2. Peel off the release papers of the Barrier Tapes.
3. Install the Ornamental Ring A and press it lightly.
3. Install the Ornamental Ring A and press it lightly.
1. Turn on the power switch and extend the lens (WIDE end).
2. Detach the battery.
3. Pour a solvent such as alcohol to two gaps A of the Ornamental Ring A with tweezers or a fine-tipped stick as shown
below.
4. Detach the Ornamental Ring A.
2. Detach the battery.
3. Pour a solvent such as alcohol to two gaps A of the Ornamental Ring A with tweezers or a fine-tipped stick as shown
below.
4. Detach the Ornamental Ring A.
Note: Do not turn the Ornamental Ring A because there is a Positioning Boss. Detach the Ornamental Ring A in the arrow direction.
Boss
Barrier Assy
Claws
Claws
A
Solvent
Tweezers
Ornamental Ring A
Ornamental Ring A
Hole
Barrier
Lever
Lever
Barrier Tapes
Barrier Assy
Barrier Assy
Claws
Claws
Barrier Tapes
Click on the first or last page to see other DSC-QX100 service manuals if exist.