Read Sony DSC-QX10 Service Manual online
DSC-QX10
4-17
Connector
Flexible Board
Claws
Sensors
OK
NG
FG Leaf
Spring
Spring
FG Leaf Spring
FG Leaf Spring
Claw
FPC Retainer
Flexible Board
FPC Tape
FPC Tape
Rib
Connector
17. Connect the two Flexible Boards to the Connectors on the LF-139 Flexible Board.
18. Stick the FPC Tape as shown in the figure below.
18. Stick the FPC Tape as shown in the figure below.
19. Install the two Sensors and attach the FG Leaf Spring.
Note: Attach the FG Leaf Spring in the correct orientation.
20. Attach the FPC Retainer.
Note: Attach the FG Leaf Spring in the correct orientation.
20. Attach the FPC Retainer.
21. Apply a voltage of 2.5 V to the DC Motor and retract the Lens.
22. Perform the Flange Back Adjustment after the assembling.
DC2.5V
Click on the first or last page to see other DSC-QX10 service manuals if exist.