HCD-M700 - Sony Audio Service Manual (repair manual)

hcd-m700 service manual
Model
HCD-M700
Pages
127
Size
11.59 MB
Type
PDF
Document
Service Manual
Brand
Device
Audio
File
hcd-m700.pdf
Date

Read Sony HCD-M700 Service Manual online

HCD-M700
AEP Model
UK Model
E Model
MICRO HI-FI COMPONENT SYSTEM
— Continued on next page —
SPECIFICATIONS
HCD-M700 is the Amplifier, DVD player,
MD deck, Tape player and Tuner section in
CMT-M700DVD.
Ver. 1.6  2009.12
SERVICE MANUAL
Amplifier section
European model:
DIN power output (rated): 15 + 15 W
(6 ohms at 1 kHz, DIN)
Continuous RMS power output (reference):
20 + 20 W
(6 ohms at 1 kHz, 10%
THD)
Music power output (reference):
40 + 40 W
Other models:
The following measured at 230 V AC, 60 Hz
DIN power output (rated): 15 + 15 W
(6 ohms at 1 kHz, DIN)
Continuous RMS power output (reference):
18 + 18 W
(6 ohms at 1 kHz, 10%
THD)
The following measured at 220 V AC, 60 Hz
DIN power output (rated): 12 + 12 W
(6 ohms at 1 kHz, DIN)
Continuous RMS power output (reference):
15 + 15 W
(6 ohms at 1 kHz, 10%
THD)
Inputs
ANALOG IN:
Sensitivity 250 mV,
(phono jacks)
impedance 47 kilohms
DIGITAL OPTICAL IN (supported sampling
frequencies: 32 kHz, 44.1 kHz and 48 kHz)
Outputs
VIDEO OUT:
max. output level
(phono jack)
1 Vp-p, unbalanced, Sync
negative, load impedance
75 ohms
S-VIDEO  OUT:
Y: 1 Vp-p, unbalanced,
(4-pin/mini-DIN jack)
Sync negative,
C: 0.286Vp-p,
load impedance 75 ohms
DIGITAL OPTICAL OUT: Optical
Wavelength: 660 nm
PHONES:
Accepts headphones with
an impedance of 8 ohms
or more
SPEAKER:
accepts impedance of 6 to
16 ohms.
DVD player section
Laser
Semiconductor laser
(DVD: 
λ
=650 nm,
CD: 
λ
=780 nm)
Emission duration:
continuous
Frequency response
DVD (PCM 48 kHz):
2 Hz – 22 kHz
CD:  2 Hz – 20 kHz
Video color system format
NTSC, PAL
MD deck section
System
Minidisc digital audio
system
Laser
Semiconductor laser
(
λ
=780 nm)
Emission duration:
continuous
Sampling frequency
44.1 kHz
Frequency response
5 Hz – 20 kHz
Model Name Using Similar Mechanism
NEW
CD Mechanism Type
CDM55A-DVBU8
Base Unit Type
DVBU8
Optical Pick-up Type
KHM-240AAA (TYPE A)
KHM-270AAA (TYPE B)
Model Name Using Similar Mechanism
HCD-M10
MD Mechanism Type
MDM-7B4M
Optical Pick-up Type
KMS-260B or KMS-260E
Model Name Using Similar Mechanism
NEW
Tape Transport Mechanism Type
CMAL1Z228
DVD
Section
MD
Section
Tape deck
Section
Sony Corporation
Audio&Video Business Group
Published by Sony Techno Create Corporation
9-874-037-07
2009L05-1
© 2009.12
2
HCD-M700
Tuner section
FM stereo, FM/AM superheterodyne tuner
FM tuner section
Tuning range
87.5 - 108.0 MHz
(50-kHz step)
Antenna
FM wire antenna
Antenna terminals
75 ohms unbalanced
Intermediate frequency
10.7 MHz
AM tuner section
Tuning range
European model:
531 - 1,602 kHz
(with the tuning interval
set at 9 kHz)
Other models:
530 - 1,710 kHz
(with the tuning interval
set at 10 kHz)
531 - 1,602 kHz
(with the tuning interval
set at 9 kHz)
Antenna
AM loop antenna, external
antenna terminal
Intermediate frequency
450 kHz
General
Power requirements
European model:
230 V AC, 50/60 Hz
Other models:
110 – 120 V or
220 – 240 V AC,
50/60 Hz
Adjustable with voltage
selector
Power consumption
European model:
See the name plate
0.3 watts (at the Power
Saving mode)
Other models:
See the name plate
Dimensions (w/h/d) incl. projecting parts and controls
Amplifier/Tuner/Tape/MD/DVD section:
Approx. 159 
× 216.5 ×
330 mm
Mass
Approx. 5.9 kg
Design and specifications are subject to change
without notice.
Tape deck section
Recording system
4-track 2-channel stereo
Frequency response
50 – 13,000 Hz (
±3 dB),
using Sony TYPE I
cassettes
SAFETY-RELATED COMPONENT WARNING!!
COMPONENTS IDENTIFIED BY MARK 
0
 OR DOTTED LINE WITH
MARK 
0
 ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS
LIST ARE CRITICAL TO SAFE OPERATION. REPLACE THESE
COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS
APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS
PUBLISHED BY SONY.
This appliance is classified as a CLASS 1 LASER product. The
CLASS 1 LASER PRODUCT MARKING is located on the rear
exterior.
Laser component in this product is capable
of emitting radiation exceeding the limit for
Class 1.
NOTES  ON  HANDLING  THE  OPTICAL  PICK-UP
BLOCK  OR  BASE  UNIT
The laser diode in the optical pick-up block may suffer electrostatic
break-down because of the potential difference generated by the
charged electrostatic load, etc. on clothing and the human body.
During repair, pay attention to electrostatic break-down and also
use the procedure in the printed matter which is included in the
repair parts.
The flexible board is easily damaged and should be handled with
care.
FOR DVD
NOTES  ON  LASER  DIODE  EMISSION  CHECK
The laser beam on this model is concentrated so as to be focused on
the disc reflective surface by the objective lens in the optical pick-
up block. Therefore, when checking the laser diode emission,
observe from more than 30 cm away from the objective lens.
FOR MD
NOTES  ON  LASER  DIODE  EMISSION  CHECK
Never look into the laser diode emission from right above when
checking it for adjustment. It is feared that you will lose your sight.
CAUTION
Use of controls or adjustments or performance of procedures
other than those specified herein may result in hazardous radiation
exposure.
Notes on chip component replacement
• Never reuse a disconnected chip component.
• Notice that the minus side of a tantalum capacitor may be
damaged by heat.
This caution
label is
located inside
the unit.
Ver 1.2
NOTE OF REPLACING THE DVD BOARD
When replacing the DVD board, since the adjustment value is not
set up correctly, “Drive Auto Adjustment” can’t be performed.
In this case, initialize Memory in the following procedures.
Procedure:
1. Set the DVD Service Mode. (See page 44)
2. Press the [2] key of the remote commander, and set the “DRIVE
MANUAL OPERATION”. (See page 49)
3. Press the [6]  key of the remote commander, and set the “6.
Memory Check”. (See page 51)
4. Press the [CLEAR] key of the remote commander, and initialize
Memory.
3
HCD-M700
1. SERVICING  NOTES
···················································· 10
2. GENERAL
········································································ 13
3. DISASSEMBLY
······························································ 16
3-1. Case (R), Case (L), Top Cover Section ······························ 17
3-2. Front Panel Section, Back Panel Section ··························· 17
3-3. VIDEO Board, OPTICAL Board ······································ 18
3-4. SWITCH Board, JACK Board ··········································· 18
3-5. TC Board, Mechanism Deck (CMAL1Z228) ···················· 19
3-6. MAIN Board ······································································ 19
3-7. CONTROL Board ······························································ 20
3-8. POWER Board ··································································· 20
3-9. DIGITAL Board ································································· 21
3-10. MD Mechanism Deck (MDM-7B4M) ······························ 21
3-11. DVD Board ········································································ 22
3-12. DVD Mechanism Deck (CDM55A-DVBU8) ··················· 22
3-13. Holder Assy ······································································· 23
3-14. BD Board ··········································································· 23
3-15. Over Light Head (HR901) ················································· 24
3-16. OP-SUB Assy ···································································· 24
3-17. Loading Motor Assy (M703), Spindle Motor Assy (M701),
Sled Motor Assy (M702) ······················································ 25
3-18. LOADING Board, Motor (LD) Assy (M901) ··················· 25
3-19. RF-240 Board ···································································· 26
3-20. Tray ···················································································· 26
3-21. Optical Pick Up (KHM-240AAA(TYPE A))
(KHM-270AAA(TYPE B)) ···················· 27
4. TEST  MODE
··································································· 28
5. ELECTRICAL  ADJUSTMENTS
······························ 33
6. DIAGRAMS
······································································ 54
6-1. CIRCUIT BOARDS LOCATION ····································· 54
6-2. Block Diagrams ································································· 55
6-3. Schematic Diagram  – RF-240 Board – ····························· 60
6-4. Printed Wiring Board  – RF-240 Board – ·························· 61
6-5. Schematic Diagram  – BD Board (1/2) – ·························· 62
6-6. Schematic Diagram  – BD Board (2/2) – ·························· 63
6-7. Printed Wiring Board  – BD (SIDE A) Board – ················ 64
6-8. Printed Wiring Board  – BD (SIDE B) Board – ················ 65
6-9. Schematic Diagram  – DVD Board (1/8) – ························ 66
TABLE  OF  CONTENTS
6-10. Schematic Diagram  – DVD Board (2/8) – ························ 67
6-11. Schematic Diagram  – DVD Board (3/8) – ························ 68
6-12. Schematic Diagram  – DVD Board (4/8) – ························ 69
6-13. Schematic Diagram  – DVD Board (5/8) – ························ 70
6-14. Schematic Diagram  – DVD Board (6/8) – ························ 71
6-15. Schematic Diagram  – DVD Board (7/8) – ························ 72
6-16. Schematic Diagram  – DVD Board (8/8) – ························ 73
6-17. Printed Wiring Board  – DVD (SIDE A) Board – ············· 74
6-18. Printed Wiring Board  – DVD (SIDE B) Board – ············· 75
6-19. Schematic Diagram  – DIGITAL Board (1/2) – ················ 76
6-20. Schematic Diagram  – DIGITAL Board (2/2) – ················ 77
6-21. Printed Wiring Board  – DIGITAL (SIDE A) Board – ······ 78
6-22. Printed Wiring Board  – DIGITAL (SIDE B) Board – ······ 79
6-23. Schematic Diagram  – TC Board – ···································· 80
6-24. Printed Wiring Board  – TC Board – ································· 81
6-25. Schematic Diagram  – MAIN Board (1/2) – ····················· 82
6-26. Schematic Diagram  – MAIN Board (2/2) – ····················· 83
6-27. Printed Wiring Board  – MAIN Board – ··························· 84
6-28. IC Block Diagrams ···························································· 85
6-29. Schematic Diagram  – CONTROL Board (1/2) – ············· 88
6-30. Schematic Diagram  – CONTROL Board (2/2) – ············· 89
6-31. Printed Wiring Board  – CONTROL (SIDE A) Board – ··· 90
6-32. Printed Wiring Board  – CONTROL (SIDE B) Board – ··· 91
6-33. Schematic Diagram  – PANEL Section – ·························· 92
6-34. Printed Wiring Board  – PANEL Section – ······················· 93
6-35. Schematic Diagram  – OPTICAL Board – ························ 94
6-36. Printed Wiring Board  – OPTICAL Board – ····················· 95
6-37. Schematic Diagram  – POWER Section – ························· 96
6-38. Printed Wiring Board  – POWER Board – ························ 97
6-39. IC Pin Function Description ·············································· 98
7. EXPLODED  VIEWS
··················································· 106
7-1. Case Section ···································································· 106
7-2. Front Panel Section ·························································· 107
7-3. Top Cover Section ··························································· 108
7-4. Chassis Section-1 ····························································· 109
7-5. Chassis Section-2 ····························································· 110
7-6. DVD Mechanism Deck Section (CDM55A-DVBU8) ···· 111
7-7. MD Mechanism Deck Section-1 (MDM-7B4M) ············ 112
7-8. MD Mechanism Deck Section-2 (MDM-7B4M) ············ 113
8. ELECTRICAL  PARTS  LIST
··································· 114
Ver 1.1  2003.09
SILVER: KHM-240AAA (TYPE A)
BLACK: KHM-270AAA (TYPE B)
optical device
TYPE  A/B  DISCRIMINATION
4
HCD-M700
C41/Cannot Copy
The sound source is a copy of a commercially
available music software or CD-R.
cThe Serial Copy Management System prevents
making a digital copy. In addition, you cannot 
copy from a CD-R.
C71/Check OPT-IN
No component is connected to the DIGITAL
OPTICAL IN jack, or you tried to record from the
digital component which is not connected
correctly.
cConnect the optional digital component correctly
to the DIGITAL OPTICAL IN jack using the
digital optical cable (not supplied).
The power of the connected component is not
turned on.
cCheck if the power of the connected digital
component is on. Refer to the operating
instructions supplied with the component.
The digital optical cable is disconnected, or the
power of the connected component is turned off
while recording the digital audio from the
component connected to the DIGITAL OPTICAL
IN jack.
cConnect the digital optical cable, or turn on the
power of the connected component.
E0001/MEMORY NG
The component has internal problem.
cConsult your nearest Sony dealer.
E0101/LASER NG
There is a problem with the laser pickup.
cThe laser pickup may be damaged. Consult your
nearest Sony dealer.
Self-diagnosis display
This system has a Self-diagnosis display
function to let you know if there is a system
malfunction. The display shows a code made
up of three or five letters and a message
alternately to show you the problem. To solve
the problem refer to the following list. If any
problem persists, consult your nearest Sony
dealer.
C11/Protected
The MD is protected against erasure.
cRemove the MD and slide the tab to close the
slot. 
C12/Cannot Copy
You tried to record a CD with a format that the
system does not support, such as a CD-ROM.
cRemove the disc and turn off the system once,
then turn it on again.
C13/REC Error
Recording could not be performed properly.
cMove the system to a stable place, and start
recording over from the beginning.
The MD is dirty or scratched, or the MD does not
meet the standards.
cReplace the MD and start recording over from
the beginning.
C13/Read Error
The MD deck cannot read the disc information
properly.
cRemove the MD once, then insert it again.
C14/Toc Error
The MD deck cannot read the disc information
properly.
cReplace the MD.
cErase all the recorded contents of the MD using
the All Erase Function.
Page of 127
Display

Download Sony HCD-M700 Service Manual (Repair Manual)

Here you can read online and download Sony HCD-M700 Service Manual in PDF. HCD-M700 service manual will guide through the process and help you recover, restore, fix, disassemble and repair Sony HCD-M700 Audio. Information contained in service manuals typically includes schematics / circuit diagrams, wiring diagrams, block diagrams, printed wiring boards, exploded views, parts list, disassembly / assembly, pcb.