DSC-P41, DSC-P43 (serv.man4) - Sony Digital Camera Service Manual (repair manual). Page 23

6-21

Symptom

data cannot be saved normally. (The data set-
ting during adjustment cannot be cancelled)

Cause

• Data writing to the flash memory failed.
• Connection is faulty.
• Power supply is not installed correctly.

Remedy

• On the SEUS Operation screen, 

[Set]

 the data

to the pages and addresses displayed in the
message, and 

[Save]

  them. (Cancel manu-

ally the data setting during adjustment.)

• Check the connection.
• Install the power supply correctly.

The Automatic Adjustment Program sets the data for adjustment
before the adjustment starts. Accordingly, if the adjustment termi-
nates by an error, the data during the adjustment may be left in the
camera.

With this data left in the camera, the camera will not
operate normally.

In this case, the 

[Release Data Setting]

  button is displayed in

“red” on the screen as shown in Fig. 6-1-45, 46 and 47. Click the

[Release Data Setting]

 button to cancel the data setting. When

the data setting is cancelled, the button color becomes “white”.

When “Data Save Error” occurred,  the 

[Release Data

Setting]

 button is displayed in “white”.

To cancel the data setting, perform it on the SEUS Op-
eration screen. How to cancel the data setting is displayed
in the error message.

How to cancel the 
data setting during 
adjustment is 
display here.