Read Sony DSC-P31 / DSC-P31M Service Manual online
5-18
DSC-P31/P31M
4.
Flange Back Check
Mode
CAMERA
Subject
Siemens star
(50 cm from the front of the lens)
(Luminance: 200 to 400 lux)
(50 cm from the front of the lens)
(Luminance: 200 to 400 lux)
Measurement Point
Check operation on monitor TV
Measuring Instrument
Specified value
Focused at the TELE end and
WIDE end
WIDE end
Checking method:
Order Page Address Data
Procedure
1
Place the Siemens star 50 cm
from the front of the lens.
from the front of the lens.
2
To open the IRIS , decrease
the luminous intensity to the
Siemens star up to a point
before noise appear on the
image.
the luminous intensity to the
Siemens star up to a point
before noise appear on the
image.
3
Perform “Data setting during
camera system adjustment”.
(Refer to page 5-13)
camera system adjustment”.
(Refer to page 5-13)
4
6
90
00
5
6
91
00
6
6
92
00
7
6
93
B0
8
6
01
79
Press PAUSE button.
9
6
07
Check the data
changes to “01”.
changes to “01”.
10
Check that the lens is
focused.
focused.
Processing after Completing Adjustment:
Order 2Page Address Data
Procedure
1
6
01
00
2
6
93
00
3
Release the data setting
performed at step 3.
(Refer to page 5-13)
performed at step 3.
(Refer to page 5-13)
5.
F No. Compensation
RadarW
RadarW
RadarW
RadarW
RadarW
Compensate the unevenness of the iris meter sensitivity.
Mode
CAMERA
Subject
Clear chart
(Standard picture frame with the
zoom lens at WIDE end)
(Standard picture frame with the
zoom lens at WIDE end)
Adjustment Page
F
Adjustment Address
5E to 64
Note 1:
Check that the data of page: 6, address: 02 is “00”.
If not, turn the power of unit OFF/ON.
If not, turn the power of unit OFF/ON.
Adjusting method:
Order Page Address Data
Procedure
1
Perform “Data setting during
camera system adjustment”.
(Refer to page 5-13)
camera system adjustment”.
(Refer to page 5-13)
2
Perform “Picture Frame
setting”.
(Refer to page 5-14)
setting”.
(Refer to page 5-14)
3
6
01
BB
Press PAUSE button.
(Note 2)
(Note 2)
4
6
02
Check the data changes to
“01”.
“01”.
Note 2:
The adjustment data will be automatically input to page:
F, address: 5E to 64.
F, address: 5E to 64.
Processing after Completing Adjustment:
Order Page Address Data
Procedure
1
6
01
00
Press PAUSE button.
2
Release the data setting
performed at step 1.
(Refer to page 5-13)
performed at step 1.
(Refer to page 5-13)
Click on the first or last page to see other DSC-P31 / DSC-P31M service manuals if exist.