Read Sony DSC-P200 (serv.man12) Service Manual online
— 2 —
DSC-P200
2-5. ZOOM MOTOR UNIT REPLACEMENT AND INSPECTION PROCEDURES
Service parts
Part Number
Part Name
Quantity
1
2-655-042-01
Zoom Motor Unit
1
Tools used
Adhesive (Super X) (Note 1)
Note 1: Use adhesive (Super X) or an equivalent article.
Adhesive (Super X) (Note 1)
Note 1: Use adhesive (Super X) or an equivalent article.
Don’t use what becomes white after drying like a quick-drying glue.
Note 2: These parts are not prepared as service parts.
Recycle removed screws.
2-5-1. REMOVAL OF ZOOM MOTOR UNIT FROM MAIN SET
1
Remove two screws that secure the zoom motor unit.
* Removed screws are recycled. Do not lose it.
2
Peel off the protection tape affixed to the zoom motor.
* Take care not to damage the flexible board.
3
Insert tweezers from the side to which nothing is affixed, and remove the sensor from the gearbox (2 places).
* Inserting the tweezers at a burst could crack the solder or damage the sensor.
4
Unsolder the zoom motor.
2. DISASSEMBLY
1
not supplied (Note 2)
Zoom Motor Unit
Two Screws
Protection Tape
Zoom Motor Unit
Zoom Motor
Flexible Board
Solder
Tweezers
Gearbox
Sensor
Side which affix nothing
Sensor
Click on the first or last page to see other DSC-P200 (serv.man12) service manuals if exist.