DSC-P2 (serv.man3) - Sony Digital Camera Service Manual (repair manual). Page 16

Read Sony DSC-P2 (serv.man3) Service Manual online

12
filename[C:\My Documents\_upload job\3075509111\3075509111DSCP2UC\02GB-DSCP2UC\04BAS.FM]
masterpage:L1-Left-00
 model name1[DSC-P2]
 [3-075-509-11(1)]
Charging the battery pack (continued)
Charging time
This represents the time required to charge 
fully depleted battery pack using the 
supplied AC-LS1A AC power adaptor in 
an environment where the ambient 
temperature is 25°C (77°F).
Battery life and the number of 
images that can be recorded/
viewed
The tables show approximate guidelines 
for the length of time the camera can be 
used when image quality is set to 
Standard, when you shoot in Flash mode 
”, and when you shoot in Normal 
mode in an environment where the 
ambient temperature is 25°C (77°F), and 
the supplied battery pack is fully charged. 
The guidelines for the number of images 
that can be recorded or viewed allow for 
changing the “Memory Stick” as 
necessary. Actual results may differ 
slightly from these, depending on the 
conditions of use.
Shooting* still images
*
Shooting one image approximately every 
three seconds
Viewing** still images
**
With the LCD screen on, viewing single images 
in order, one approximately every three seconds
Shooting*** movies
***
Continuous shooting with an image size of 
160×112
The battery life and the number of images 
recordable are decreased under the following 
conditions:
At low temperatures.
Using the flash.
Turning on and off frequently.
Using the zoom frequently.
When [POWER SAVE] is set to [OFF].
Using the battery pack used repeatedly or 
self-discharged after charging (page 96).
The POWER SAVE function
When the POWER SAVE function is 
activated, you can shoot for a longer 
period of time.
Set the mode dial to SET UP, and set 
[POWER SAVE] in [SETUP 2] to [ON]. 
The factory setting is [ON] (page 93).
When the POWER SAVE function is 
activated
The LCD screen will be darker than it is when 
[POWER SAVE] is set to [OFF]. You cannot 
change the settings for [LCD BACKLIGHT] 
at this time (page 93).
When the power turns on, the Flash mode is 
normally set to “
” (No flash).
If you want to shoot using the flash, press v 
( ) on the control button, and select “ ” 
(Forced flash) or Auto (page 24).
When shooting sill images, the focus only 
works while the shutter button is pressed 
down halfway.
Battery pack
Full charge 
(min.)
NP-FC10 (supplied)
Approx.150
Image 
size
NP-FC10 (supplied)
LCD 
screen
Battery 
life (min.)
No. of 
images
1600×1200
ON
Approx. 70
Approx. 1400
OFF
Approx. 110 Approx. 2200
640×480 ON
Approx. 70
Approx. 1400
OFF
Approx. 110 Approx. 2200
Image size
NP-FC10 (supplied)
Battery life 
(min.)
No. of images
1600×1200
Approx. 160 Approx. 3200
640×480
Approx. 160 Approx. 3200
NP-FC10 (supplied)
LCD screen ON 
(min.)
LCD screen OFF 
(min.)
Approx. 90
Approx. 120
01cov.book  Page 12  Wednesday, April 3, 2002  11:17 AM
Page of 107
Display

Click on the first or last page to see other DSC-P2 (serv.man3) service manuals if exist.