Read Sony DSC-P2 (serv.man3) Service Manual online
filename[C:\My Documents\_upload job\3075509111\3075509111DSCP2UC\02GB-DSCP2UC\04BAS.FM]
masterpage:L1-Right
model name1[DSC-P2]
[3-075-509-11(1)]
11
G
e
tt
in
g star
te
d
,
Connect the power cord (mains
lead) to the AC power adaptor
and to a wall outlet (wall
socket).
lead) to the AC power adaptor
and to a wall outlet (wall
socket).
Charging starts, and the /CHG lamp lights.
When the /CHG lamp goes out, charging is
finished (full charge).
finished (full charge).
•
When charging is finished, disconnect the AC
power adaptor both from the camera and the
wall outlet (wall socket).
power adaptor both from the camera and the
wall outlet (wall socket).
To remove the battery pack
Open the battery/“Memory Stick” cover,
and push down the battery eject lever in the
arrow direction as illustrated above.
and push down the battery eject lever in the
arrow direction as illustrated above.
•
Make sure you do not drop the battery pack
when you remove it.
when you remove it.
4
Power cord
(mains lead)
(mains lead)
AC power adaptor
2
To a wall outlet
(wall socket)
1
/CHG
/CHG lamp
Battery eject lever
Battery remaining indicator
The battery remaining indicator shows
the remaining shooting or viewing
time.
the remaining shooting or viewing
time.
•
It takes about 1 minute that the proper
remaining time is calculated.
remaining time is calculated.
•
A proper remaining time may not be
indicated depending on conditions of use
or circumstances.
indicated depending on conditions of use
or circumstances.
60min
1600
4
FINE
01cov.book Page 11 Wednesday, April 3, 2002 11:17 AM
Click on the first or last page to see other DSC-P2 (serv.man3) service manuals if exist.