DSC-J20 (serv.man2) - Sony Digital Camera Service Manual (repair manual). Page 9

DSC-J20_ADJ

5-9

Lens Option Setting order is as follows.

1)  Check that the camera is on the adjustment mode.

 Note:
 

For the setting procedure of the adjustment mode, refer to “5-1-5. Setting the Adjustment Mode”. (Page 5-3)

2)  Press the Control button “ b ” “ B ” and “ v ” “ V ”to change selected item. Choose “Lens Option”, 
 

press the “ 

 (Playback)” button to choose item.

 

 

If the setting is disabled, refer to “5-1-6. Enabling the Adjustment” to enable the setting. (Page 5-3)

3)  Press the Control button “ V ” to “Enable LDC” item after press the Control button “ B ” to set enable (00001). 

Press the Control button “ V ” to “Enable LSC” item after press the Control button “ B ” to set enable (00001). 
Final Press the “ 

 (Playback)” button to return to adjustment mode, then press the Control button “ z ”, 

 

select “OK” and press the Control button “ z ” to start.

 

 

LDC : Lens Distortion Correction

 

LSC : Lens Shading Correction

4)  Confirm the indication on the screen.

When the setting is finished, the setting completion indication appears on the screen. (Fig. 5-3-33)
Press the “ 

 (Playback)” button to return to adjustment menu.

LDC

ON

LSC

ON

Adjustment order

Screen display

The adjustment is finished normally.

LimitR:363 674
LimitB:305 564

MEAN G

Flash

DELAY

R Gain

G Gain

B Gain

0x0184

0x0898

10035

549

256

435

Move OK...

OK

The adjustment is complete.

The adjustment is finished abnormally.

NG

Malfunction of Flash WB 
adjustment

The Flash WB Adjustment order is as follows.

Note:
Perform the Flash WB Adjustment after those performed in 5-3-3 to 5-3-4.

Confirm the indication

on the screen.

In case of the adjustment is finished abnormally,
the following indication appears on the screen.
(Fig. 5-3-32)
In this case, confirm the adjusting environment
and readjust.

Press the Control button “ b ” “ B ” and “ v ” “ V ” to change selected item. Choose “FLASH WB”,
press the Control button “ z ”, select “OK”, and press the Control button “ z ” to start.
* If the adjustment is disabled, refer to “5-1-6. Enabling the Adjustment” to enable the adjustment. (Page 5-3)

In case of the adjustment is finished normally,
the adjustment completion indication appears
on the screen. (Fig. 5-3-31)
Press the “

(Playback)” button to return to

adjustment menu.

Check that the camera is on the adjustment mode.

* For the setting procedure of the adjustment mode, refer to “5-1-5. Setting the Adjustment Mode” (Page 5-3).

Place the camera in front of the Flash Adjustment Box. (Fig. 5-3-30 on Page 5-8)

Finished normally.

Finished abnormally.