Read Sony DSC-H70 (serv.man2) Service Manual online
DSC-H70_L2
1-7
qj
Install the Rear Mirror Plate with the five screws in the order of numbers.
Up side
Down side
Screws
Screws
Rear mirror plate
1
3
4
5
2
Fixed Stationary
Tube Block
Tube Block
Flexible boards
Naruto Gear
Naruto Gear
Holding part
qf
Install the Naruto Gear. (up side is shallow hole side.)
qg
Extension the lens by turning the Naruto Gear.
qh
Eject the Flexible Board from Fixed Stationary Tube Block, set the selvage of Flexible Board into the holding part.
ws
Connect the Flexible board to the connector, and solder the four locations.
wd
Perform the Flange Back Adjustment after the assembling.
w;
Install the Zoom Motor with the screw.
wa
Install the Flexible board with the five Adhesive Tapes and three claws.
qk
Install the spring to hook.
ql
Rotate the Naruto Gear and the lens is retractile.
Solders
Flexible
board
board
Flexible
board
board
Flexible
board
board
Hook
Spring
Screw
Zoom Motor
Claws
Adhesive tapes
Adhesive tapes
Click on the first or last page to see other DSC-H70 (serv.man2) service manuals if exist.