Read Sony DSC-H70 (serv.man2) Service Manual online
DSC-H70_L2
1-6
7
Install the 1 Group Assy so that the Coma attached white part match the opposite side groove of triangle-shaped projection.
Installation
1
Install Straight Tube B to Cam Tube Block Assy with aligning the positions as shown in figure.
2
Install the 2 Group Assy to Cam Tube Block Assy so that white part of 2 Group Assy becomes opposite position of gear portion
of Cam Tube Block Assy.
of Cam Tube Block Assy.
3
Rotate the Straight Tube B.
4
Install the 3 Group Assy.
5
Install the Shutter Assy. (floating slightly)
6
Rotate the Straight Tube B.
2 Group Assy
White part
Straight Tube B
Straight Tube B
Cam Tube
Block Assy
Block Assy
Gear portion of
Cam Tube Block Assy
Cam Tube Block Assy
Coma attached
white part
white part
Triangle-shaped
projection
projection
Shutter Assy
Straight
Tube B
Tube B
3 Group Assy
8
Install the Cam Tube Assy to 1 Group Assy with aligning gear edge of Cam tube Assy
with triangle-shaped projection of 1 Group Assy.
with triangle-shaped projection of 1 Group Assy.
9
Rotate the 1 Group Assy with tucking it slightly.
0
Rotate the straight tube B only.
qa
Rotate the Cam Tube Block Assy only. (lens tube is dropped.)
Fixed Stationary
Tube Block
Tube Block
qs
Insert the lens tube to Fixed Stationary Tube Block.
qd
Rotate the Cam Tube Block Assy slightly, insert it into the lens tube.
Triangle-shaped
projection
projection
Gear edge
Straight
Tube B
Tube B
Cam Tube
Block Assy
Block Assy
1 Group Assy
Cam Tube
Block Assy
Block Assy
Cam Tube
Block Assy
Block Assy
Click on the first or last page to see other DSC-H70 (serv.man2) service manuals if exist.