Read Sony DSC-H400 Service Manual online
DSC-H400
4-17
4-3-12. Set Language Destination
Note:
Finish all of the adjustment except for the Language Destination setting.
Once the Language Destination setting is finished, it cannot be reset.
Once the Language Destination setting is finished, it cannot be reset.
USB Driver and Service Tool
Put the two folders “USB Driver” and “Service Tool” downloaded in “4-1-5. Setting the Adjustment Mode” (Page 4-3) in any place of the PC.
Confirm that the “USB Driver” folder includes the following items.
Select the USB driver for operation software of the PC.
Confirm that the “USB Driver” folder includes the following items.
Select the USB driver for operation software of the PC.
• USB_driver_win_32bit_DSCA
(Folder)
• USB_driver_win7_64bit_DSCA
(Folder)
The procedure of installing a USB Driver is as follows.
1) Connect the camera started up with the Adjustment mode, and the PC with a Dedicated USB Cable.
2) Install the USB Driver according to the guidance on the screen.
Connecting USB to PC
Connect the equipment as shown below. (Fig. 4-3-31)
Dedicated USB Cable
Personal Computer
1 To a USB jack of the PC
2 To the
(USB)/A/V OUT
jack
(USB)/A/V OUT
jack
Fig.
4-3-31
Starting up the Service Tool
Double click the “ServiceTool_Ver[][][].exe” in the “Service Tool” folder to start up the Service Tool. (Fig. 4-3-32)
Fig.
4-3-32
Click on the first or last page to see other DSC-H400 service manuals if exist.