DSC-H400 - Sony Digital Camera Service Manual (repair manual). Page 33

DSC-H400

4-13

Adjustment order

Screen display

The Light/S.S (Light Dead Pixel/Slow Shutter Dead Pixel)
Adjustment order is as follows.

Note:
Perform the Light/S.S Adjustment after those performed in 4-3-4 to 4-3-8.

The adjustment is finished normally.

OK

The adjustment is complete.

Confirm the indication

on the screen.

Finished abnormally.

Finished normally.

In case of the indication other than that shown in
Fig. 4-3-25 appears on the screen, confirm the
adjusting environment and readjust.

Press the Control button “ b ” “ B ” and “ v ” “ V ” to change selected item. Choose “Light S.S (BLACK)”, 
press the Control button “ z ”, select “OK”, and press the Control button “ z ” to start.
*1  If the adjustment is disabled, refer to “4-1-6. Enabling the Adjustment” to enable the adjustment. (Page 4-3)
*2  It takes approximately 15 minutes or more on this adjustment.

In case of the adjustment 
is finished normally, the 
adjustment completion 
indication appears on the 
screen. (Fig. 4-3-25)
* The Self-timer lamp 
lights up. (Fig. 4-3-24)

Check that the camera is on the adjustment mode.

* For the setting procedure of the adjustment mode, refer to “4-1-5. Setting the Adjustment Mode” (Page 4-3).

Press the flash unit pop-up button to raise the flash.
Cover camera lens (All black) (Fig. 4-3-23)

Restart the camera.

Self-timer lamp

Camera

Equipment required: Cover camera lens

(All black)

Black cloth