Read Sony DSC-H3 (serv.man6) Service Manual online
— 2 —
DSC-H3_L3
1. SERVICE NOTE
ENGLISH
JAPANESE
ENGLISH
JAPANESE
1-6. ANGULAR VELOCITY SENSOR TYPE CHECK
As for the angular velocity sensor of this set, Type M (SE501, SE502) in addition to Type S (SE501) was added.
Along with this addition, as for the SY-185 board, suffix: -21 (Type M) in addition to suffix: -11 (Type S) is added.
Along with this addition, as for the SY-185 board, suffix: -21 (Type M) in addition to suffix: -11 (Type S) is added.
SE502
(PITCH)
SE501
(YAW)
(YAW)
SE501
(PITCH/YAW)
SY-185 BOARD (SIDE A)
Type S (Suffix: -11)
Type M (Suffix: -21)
IC503
•
Checking Method of Angular Velocity Sensor by Mount Parts
•
Checking Method of Angular Velocity Sensor by Data Value
Checking method:
1) Connect the camera and PC with USB cable, and switch the driver from “USB Mass Storage Device” to “Sony Seus USB Driver”.
2) Start SeusEX and click [Connect] button.
3) Enter the Block, Page, and Address given below to check the data value.
1) Connect the camera and PC with USB cable, and switch the driver from “USB Mass Storage Device” to “Sony Seus USB Driver”.
2) Start SeusEX and click [Connect] button.
3) Enter the Block, Page, and Address given below to check the data value.
Block
Page
Address
Data
Type S
Type M
11
71
0585
00
01
4) After checking the data value, click [Disconnect] button to release the connection.
Click on the first or last page to see other DSC-H3 (serv.man6) service manuals if exist.