Read Sony DSC-S40 (serv.man2) Service Manual online
SERVICE MANUAL
LEVEL
2
Link
SERVICE NOTE
DISASSEMBLY
BLOCK DIAGRAMS
FRAME SCHEMATIC DIAGRAM
SCHEMATIC DIAGRAMS
PRINTED WIRING BOARDS
REPAIR PARTS LIST
SPECIFICATIONS
SERVICE NOTE
DISASSEMBLY
BLOCK DIAGRAMS
FRAME SCHEMATIC DIAGRAM
SCHEMATIC DIAGRAMS
PRINTED WIRING BOARDS
REPAIR PARTS LIST
SPECIFICATIONS
Link
Revision History
Revision History
How to use
Acrobat Reader
How to use
Acrobat Reader
Sony EMCS Co.
DSC-S40
• For ADJUSTMENTS (SECTION 6), refer to SERVICE MANUAL, ADJ (9-876-868-51).
• For INSTRUCTION MANUAL, refer to SERVICE MANUAL, LEVEL 1 (9-876-868-4
• For INSTRUCTION MANUAL, refer to SERVICE MANUAL, LEVEL 1 (9-876-868-4
2
).
• This service manual contains information for Japanese model as well.
• Reference No. search on printed wiring boards is available.
• Reference No. search on printed wiring boards is available.
• The Cautions at the Time of Lens Block handling
• Method for Copying or Erasing the Data in Internal Memory.
• The Method of Attachment of FP-176 Flexible Board.
• HELP: Sheet attachment positions and procedures of processing the flexible boards/harnesses are shown.
• Method for Copying or Erasing the Data in Internal Memory.
• The Method of Attachment of FP-176 Flexible Board.
• HELP: Sheet attachment positions and procedures of processing the flexible boards/harnesses are shown.
Ver. 1.3 2007.09
DIGITAL STILL CAMERA
On the CH-169 and SY-116 boards
This service manual procides the information that is premised the
circuit board replacement service and not intended repair inside the
CH-169 and SY-116 boards.
Therefore, schematic diagram, printed wiring board and electrical
parts list of the CH-169 and SY-116 boards are not shown.
The following pages are not shown.
circuit board replacement service and not intended repair inside the
CH-169 and SY-116 boards.
Therefore, schematic diagram, printed wiring board and electrical
parts list of the CH-169 and SY-116 boards are not shown.
The following pages are not shown.
Schematic diagrams .................. Pages 4-9 to 4-26
Printed wiring boards ................ Pages 4-37 to 4-40
Waveforms ................................ Pages 4-49
Mounted parts location .............. Pages 4-50
Electrical parts list ..................... Pages 5-6 and 5-8 to 5-11
Printed wiring boards ................ Pages 4-37 to 4-40
Waveforms ................................ Pages 4-49
Mounted parts location .............. Pages 4-50
Electrical parts list ..................... Pages 5-6 and 5-8 to 5-11
The above-described information is shown in service manual Level 3.
DSC-S40
2007I0500-1
© 2007.9
Published by Kohda TEC
9-876-868-31
US Model
Canadian Model
AEP Model
UK Model
E Model
Australian Model
Hong Kong Model
Chinese Model
Korea Model
Brazilian Model
Japanese Model
Tourist Model
— 2 —
DSC-S40
SPECIFICATIONS
Camera
[System]
Image device
6.85 mm (1/2.7 type) color
CCD, Primary color filter
CCD, Primary color filter
Total pixel number of camera
Approx. 4 231 000 pixels
Effective pixel number of camera
Approx. 4 065 000 pixels
Lens
Carl Zeiss Vario-Tessar
3
3
× zoom lens
f = 5.1 - 15.3 mm (32 - 96 mm
when converted to a 35 mm still
camera)
F2.8 - 5.1
Automatic ND filter switching
when converted to a 35 mm still
camera)
F2.8 - 5.1
Automatic ND filter switching
Exposure control Automatic exposure, Scene
Selection (7 modes)
White balance
Automatic, Daylight, Cloudy,
Fluorescent, Incandescent
Fluorescent, Incandescent
File format (DCF compliant)
Still images: Exif Ver. 2.2
JPEG compliant, DPOF
compatible
Movies: MPEG1 compliant
(Monaural)
JPEG compliant, DPOF
compatible
Movies: MPEG1 compliant
(Monaural)
Recording media Internal memory 32 MB
“Memory Stick”
Flash
Recommended distance (ISO
set to Auto): 0.2 m to 3.8 m
(7 7/8 inches to 12 feet 5 19/32
inches) (W)/0.5 m to 2.1 m
(19 11/16 inches to 6 feet
10 11/16 inches) (T)
set to Auto): 0.2 m to 3.8 m
(7 7/8 inches to 12 feet 5 19/32
inches) (W)/0.5 m to 2.1 m
(19 11/16 inches to 6 feet
10 11/16 inches) (T)
[Input and Output connectors]
USB jack
mini-B
USB communication
Hi-Speed USB (USB 2.0
compliant)
compliant)
[LCD screen]
LCD panel
3.8 cm (1.5 type) TFT drive
Total number of dots
76 800 (320
×240) dots
[Power, general]
Power
R6 (size AA) Alkaline batteries
(2), 3 V
HR 15/51:HR6 (size AA)
Nickel-Metal Hydride batteries
(2, not supplied), 2.4 V
ZR6 (size AA) Oxy Nickel
Primary Battery (2, not
supplied), 3 V
AC-LS5K AC Adaptor (not
supplied), 4.2 V
(2), 3 V
HR 15/51:HR6 (size AA)
Nickel-Metal Hydride batteries
(2, not supplied), 2.4 V
ZR6 (size AA) Oxy Nickel
Primary Battery (2, not
supplied), 3 V
AC-LS5K AC Adaptor (not
supplied), 4.2 V
Power consumption
(during shooting with the LCD screen on)
(during shooting with the LCD screen on)
0.9 W
Operating temperature
0
°C to +40°C (+32°F to
+104
°F)
Storage temperature
−20°C to +60°C (−4°F to
+140
+140
°F)
Dimensions
99
×51.7×34.2 mm
(4
×2 1/8×1 3/8 inches)
(W/H/D, excluding maximum
protrusions)
protrusions)
Mass
Approx. 180 g (6.4 oz)
(including two batterries and
wrist strap)
(including two batterries and
wrist strap)
Microphone
Electret condenser microphone
Speaker
Dynamic speaker
Exif Print
Compatible
PRINT Image Matching III
Compatible
PictBridge
Compatible
Design and specifications are subject to change
without notice.
without notice.
— 3 —
DSC-S40
SAFETY-RELATED COMPONENT WARNING!!
COMPONENTS IDENTIFIED BY MARK
0
OR DOTTED LINE WITH
MARK
0
ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS
LIST ARE CRITICAL TO SAFE OPERATION. REPLACE THESE
COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS
APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS
PUBLISHED BY SONY.
COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS
APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS
PUBLISHED BY SONY.
ATTENTION AU COMPOSANT AYANT RAPPORT
À LA SÉCURITÉ!
LES COMPOSANTS IDENTIFÉS PAR UNE MARQUE
0
SUR LES
DIAGRAMMES SCHÉMATIQUES ET LA LISTE DES PIÈCES SONT
CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE
REMPLACER CES COMPOSANTS QUE PAR DES PIÈSES SONY
DONT LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU
DANS LES SUPPÉMENTS PUBLIÉS PAR SONY.
CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE
REMPLACER CES COMPOSANTS QUE PAR DES PIÈSES SONY
DONT LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU
DANS LES SUPPÉMENTS PUBLIÉS PAR SONY.
1.
Check the area of your repair for unsoldered or poorly-soldered
connections. Check the entire board surface for solder splashes
and bridges.
connections. Check the entire board surface for solder splashes
and bridges.
2.
Check the interboard wiring to ensure that no wires are
"pinched" or contact high-wattage resistors.
"pinched" or contact high-wattage resistors.
3.
Look for unauthorized replacement parts, particularly
transistors, that were installed during a previous repair. Point
them out to the customer and recommend their replacement.
transistors, that were installed during a previous repair. Point
them out to the customer and recommend their replacement.
4.
Look for parts which, through functioning, show obvious signs
of deterioration. Point them out to the customer and
recommend their replacement.
of deterioration. Point them out to the customer and
recommend their replacement.
5.
Check the B+ voltage to see it is at the values specified.
6.
FLEXIBLE Circuit Board Repairing
•
Keep the temperature of the soldering iron around 270
°
C
during repairing.
•
Do not touch the soldering iron on the same conductor of the
circuit board (within 3 times).
circuit board (within 3 times).
•
Be careful not to apply force on the conductor when soldering
or unsoldering.
or unsoldering.
Unleaded solder
Boards requiring use of unleaded solder are printed with the lead-
free mark (LF) indicating the solder contains no lead.
(Caution: Some printed circuit boards may not come printed with
the lead free mark due to their particular size.)
free mark (LF) indicating the solder contains no lead.
(Caution: Some printed circuit boards may not come printed with
the lead free mark due to their particular size.)
: LEAD FREE MARK
Unleaded solder has the following characteristics.
•
Unleaded solder melts at a temperature about 40
°
C higher than
ordinary solder.
Ordinary soldering irons can be used but the iron tip has to be
applied to the solder joint for a slightly longer time.
Soldering irons using a temperature regulator should be set to
about 350
Ordinary soldering irons can be used but the iron tip has to be
applied to the solder joint for a slightly longer time.
Soldering irons using a temperature regulator should be set to
about 350
°
C.
Caution: The printed pattern (copper foil) may peel away if the
heated tip is applied for too long, so be careful!
heated tip is applied for too long, so be careful!
•
Strong viscosity
Unleaded solder is more viscous (sticky, less prone to flow) than
ordinary solder so use caution not to let solder bridges occur such
as on IC pins, etc.
Unleaded solder is more viscous (sticky, less prone to flow) than
ordinary solder so use caution not to let solder bridges occur such
as on IC pins, etc.
•
Usable with ordinary solder
It is best to use only unleaded solder but unleaded solder may
also be added to ordinary solder.
It is best to use only unleaded solder but unleaded solder may
also be added to ordinary solder.
SAFETY CHECK-OUT
After correcting the original service problem, perform the following
safety checks before releasing the set to the customer.
CAUTION
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
Replace only with the same or equivalent type.
— 4 —
DSC-S40
TABLE OF CONTENTS
1.
SERVICE NOTE
1-1.
Note for Repair ································································ 1-1
1-2.
Discharging of The ST-116 Board’s
Charging Capacitor (C901) ············································· 1-1
Charging Capacitor (C901) ············································· 1-1
1-3.
The Cautions at the Time of Lens Block Handling ········· 1-2
1-4.
Description on Self-diagnosis Display ···························· 1-2
1-5.
Method for Copying or Erasing the Data in Internal
Memory ··········································································· 1-3
Memory ··········································································· 1-3
1-6.
Process After Fixing Flash Error ····································· 1-4
2.
DISASSEMBLY
2-1.
Disassembly ····································································· 2-1
2-2.
SY-116 Board Service Position ······································· 2-5
2-3
The Method of Attachment of FP-176 Flexible Board ···· 2-7
2-4.
Circuit Boards Location ·················································· 2-9
3.
BLOCK DIAGRAMS
3-1.
Overall Block Diagram (1/2) ··········································· 3-1
3-2.
Overall Block Diagram (2/2) ··········································· 3-3
3-3.
Power Block Diagram ····················································· 3-5
4.
PRINTED WIRING BOARDS AND
SCHEMATIC DIAGRAMS
SCHEMATIC DIAGRAMS
4-1.
Frame Schematic Diagram ·············································· 4-1
4-2.
Schematic Diagrams ························································ 4-5
CD-575 FLEXIBLE (CCD IMAGER) ··························· 4-7
SW-437 BOARD (CONTROL SWITCH) ···················· 4-27
ST-116 BOARD (FLASH DRIVE) ······························ 4-29
MS-259 FLEXIBLE
(MEMORY STICK CONNECTOR) ···························· 4-31
FP-176 FLEXIBLE
(LENS COVER MOTOR) ············································ 4-31
CONTROL SWITCH BLOCK (RL51320) ·················· 4-32
SW-437 BOARD (CONTROL SWITCH) ···················· 4-27
ST-116 BOARD (FLASH DRIVE) ······························ 4-29
MS-259 FLEXIBLE
(MEMORY STICK CONNECTOR) ···························· 4-31
FP-176 FLEXIBLE
(LENS COVER MOTOR) ············································ 4-31
CONTROL SWITCH BLOCK (RL51320) ·················· 4-32
4-3.
Printed Wiring Boards ··················································· 4-35
SW-437 ······································································· 4-41
ST-116
ST-116
······································································· 4-45
MS-259 FLEXIBLE ····················································· 4-46
FP-176 FLEXIBLE ······················································· 4-47
FP-176 FLEXIBLE ······················································· 4-47
4-5.
Mounted Parts Location ················································ 4-51
5.
REPAIR PARTS LIST
5-1.
Exploded Views ······························································· 5-2
5-1-1. Overall Assembly ··························································· 5-2
5-1-2. BT Holder Block ····························································· 5-3
5-1-3. Batery Holder Section ··················································· 5-4
5-2.
5-1-2. BT Holder Block ····························································· 5-3
5-1-3. Batery Holder Section ··················································· 5-4
5-2.
Electrical Parts List ························································· 5-5
Section
Title
Page
Section
Title
Page
