DSC-H20 (serv.man2) - Sony Digital Camera Service Manual (repair manual). Page 5

1-2

DSC-H20_L2

When replacing the lens, write down the PITCH/YAW data and wide limit data given on the lens for service.
Start the Adjust Manual in the Adjust Station and execute the “Wide Limit Adjustment” and “Angular Velocity Sensor Sensitivity Adjustment”,
input the data written down.

The data can be copied/erased by the operations on the HOME screen. (When erasing the data, execute formatting the internal memory.)

When replacing the SY-224 board, erase the data in internal memory of the board before replacement.

When replacing the SY-224 board, execute formatting and initialize the internal memory after replacement.

Copies all images in the internal memory to a “Memory Stick Duo” media.

1

Insert a “Memory Stick Duo” media with sufficient free capacity into the 
camera.

2

MENU

t

 

 (Settings) 

t

 

 (“Memory Stick” Tool) 

t

 [Copy] 

t

 [OK] 

t z

 on the control button

• Use a fully charged battery pack. If you attempt to copy image files using a battery pack with little 

remaining charge, the battery pack may run out, causing copying to fail or possibly corrupting the data.

• Images cannot be copied individually.

• The original images in the internal memory are retained even after copying. To delete the contents of the 

internal memory, remove the “Memory Stick Duo” media after copying, then format the internal memory 
([Format] in [Internal Memory Tool]).

• A new folder is created on the “Memory Stick Duo” media and all the data will be copied to it. You 

cannot choose a specific folder and copy images to it.

Wide Limit Data (2-byte data)

XX YY

XX YY

YAW data

PITCH/YAW Data

PITCH data

P.PP / Y.YY

P.PP/Y.YY

The PITCH/YAW data and wide limit
data of lens are written only repair parts.