Read Sony DSC-H2 (serv.man4) Service Manual online
6-4
DSC-H2_ADJ
Replaced parts
Block
Mounted parts
Board
replacement
replacement
replacement
Adjusting item
Adjustment
LCD unit
(AF illumination LED)
(CCD imager)
(Timing gen., CCD signal process)
(Camera DSP)
(One NAND flash) (Note 4)
(Video amp.)
(PITCH, YAW sensor)
LCD9001
D001
IC002
IC101
IC101
IC202
IC601
SE501, 502
(COMPLETE)
(COMPLETE)
(COMPLETE)
(COMPLETE) (Note 3, 4, 5)
Lens block
Flash unit
LCD block
AF-105 board
CD-619 board
CH-169 board
SY-150 board
SY-150 board
SY-150 board
SY-150 board
AF-105 board
CD-619 board
CH-169 board
SY-150 board
VIDEO adjustment
Video output level adj.
z
z
z
(Note 1)
Hall adj.
z
z
(Note 1)
Wide limit adj.
z
z
CAMERA adjustment 1
Flange back adj.
z
z
z
z
CAMERA adjustment 2
Flange back check
z
z
z
z
F No. compensation
Measure gain adj.
Mechanical shutter adj.
Light value adj.
(Note 2)
AWB 3200K-5800K standard data input
z z
z z z
Color reproduction adj. & check
CCD linearity check
CCD white defect compensation check
CCD black defect compensation check
CAMERA adjustment 5
Strobe adj.
z
z z
z z z
CAMERA adjustment 6
Auto focus illumination check
z
z
z
CAMERA adjustment 7
Angular velocity sensor sensitivity adj.
z
z
V-COM adj.
White Balance adj.
(Note 1)
Initialization of data
z z
CAMERA adjustment 3
CAMERA adjustment 4
z
z
LCD adjustment
z z z
z z
z z z
z
1-1. Adjusting items when replacing main parts and boards
When replacing main parts and boards, adjust the items indicated by z in the following table.
Note 1:
The automatic Adjustment Program does not support the “Initialization of data”, “Hall Adjustment” and “Wide Limit Adjust-
ment”. Perform them manually.
ment”. Perform them manually.
Note 2:
Use the AWB Adjustment Program (H2AwbAdjustment.exe).
Note 3:
When replacing the SY-150 board, erase the data in internal memory of the board before replacement.
Note 4:
When replacing the SY-150 board or the IC202 on the SY-150 board, execute formatting and initialize the internal memory after
replacement.
replacement.
Note 5:
When replacing the SY-150 board, perform “VIDEO OUT Default Data Check” and “Initial Language Data Check” after re-
placement.
placement.
Table 6-1-1
Click on the first or last page to see other DSC-H2 (serv.man4) service manuals if exist.