DSC-H100, DSC-H200 - Sony Digital Camera Service Manual (repair manual). Page 5

DSC-H100/H200

1-2

Ref. No:

F2

Part No:

1-576-415-11

Description: FUSE, MICRO (1608 TYPE) (2A/32V)

Ref. No:

F1

Part No:

1-576-415-11

Description: FUSE, MICRO (1608 TYPE) (2A/32V)

The slant of the CCD Block Assy is adjusted with the Lens L Washers, the Lens O Washers and the CCD Rubber 0.5mm in the Lens Block Assy.
After the Lens Block Assy is replaced, select and install the Lens L Washers, the Lens O Washers and the CCD Rubber 0.5mm according to the following.

Screws

CCD Block Assy

Lens Block Assy

Lens O Washers

Lens L Washers

CCD Rubber 0.5mm

Filter Mask

Washer height values A, B, and C are described on the QR Code Label attached to the Lens Block Assy. (A, B, and C show installation positions of  
Lens O Washers.) 
Combinations of these values are grouped into two types: 
The type that uses CCD Rubber 0.5mm and the type that does not use CCD Rubber 0.5mm. Install washers according to the washer installation method 
for each type.

01604750

924

XX

XX

XX

A

B

C

QR Code Label

QR Code Label

Values of Lens O Washers

B

A

C

Lens O Washers

Lens O Washers installation locations

Lens L Washers

1.  Deciding washer installation type

•  Type that uses CCD Rubber 0.5mm

a)  Two values out of three values are 60 or more.

A

B

C

60

65

45

b)  One value out of three values is 80 or more and other two values are between 50 and 60.
 Example)

A

B

C

50

55

80

 

Install washers according to “2. An example of installing washers of the type that uses CCD Rubber 0.5mm.”

•  Type that does not use CCD Rubber 0.5mm

a)  Three values are less than 50.
 Example)

A

B

C

30

25

35

 

Install washers according to “3. An example of installing washers of the type that does not use CCD Rubber 0.5mm.”

 

There are the following types of Lens L Washers and Lens O Washers.

Lens L Type Washer

Part Number

t (mm)

4-447-203-01 0.05

4-447-204-01 0.1

4-447-205-01 0.15

4-447-206-01 0.2

Lens O Type Washer

Part Number 

t (mm)

4-447-208-01 0.05

4-447-209-01 0.1

4-447-211-01 0.15

4-447-212-01

0.2