Read Sony DSC-H100 / DSC-H200 Service Manual online
DSC-H100/H200
3-1E
3. ASSEMBLY
Assembly-1: Routing harnesses.
Harnesses of
the AF Assist Light Board
the AF Assist Light Board
Harnesses of
the Charging Capacitor
the Charging Capacitor
Ribs
Assembly-2: Routing harnesses.
Harnesses of
the Flash Unit
the Flash Unit
Ribs
Assembly-3: How to distinguish the side of Optical Filter Block
facing to Lens Device.
• IR cut coating surface
The red coating is reflected.
• The other surface
The red coating is
not reflected.
not reflected.
• Side view
The red belt
is seen.
is seen.
Lens Device side
Lens Device side
Hold it with tweezers or the like.
Optical Filter Block
[IR Cut Coated Side]
[The Other Side]
The one side of the Optical Filter Block has treated with IR cut coating.
Mount the Optical Filter Block facing the IR cut coated side to the lens
device. Distinguish the IR cut coated side from the other by applying the
fluorescent light to the Optical Filter Block in the dark place (cut off the
outside light).
Mount the Optical Filter Block facing the IR cut coated side to the lens
device. Distinguish the IR cut coated side from the other by applying the
fluorescent light to the Optical Filter Block in the dark place (cut off the
outside light).
Assembly-4: Lens Cushion Tape (B) putting position.
Lens Cushion Tape (B)
34.5mm
Assembly-5: Lens Cushion Tape (A) putting position.
Lens Cushion Tape (A)
Lens Cushion Tape (A)
Sheet (Black)
Edge of the
Sheet (Black)
Sheet (Black)
Click on the first or last page to see other DSC-H100 / DSC-H200 service manuals if exist.