Read Sony XTL-75V Service Manual online
6
COVER
HOW TO PULL UP THE MONITOR
3
After making sure the shaft (stopper)
has been removed from the monitor,
pull up the monitor in the direction of arrow C.
has been removed from the monitor,
pull up the monitor in the direction of arrow C.
shaft (stopper)
C
B
A
B
2
Push the slider knob (R)
in the direction of arrow B.
in the direction of arrow B.
1
Pull the monitor base ass’y
in the direction of arrow A.
in the direction of arrow A.
2
Push the slider knob (L)
in the direction of arrow B.
in the direction of arrow B.
1
two screws
(M2
(M2
×
3)
2
Open this side, as there are screws
that fix the side plate.
that fix the side plate.
1
six screws
(M2
(M2
×
3)
3
Remove the cover in the
direction of arrow A.
direction of arrow A.
1
two screws
(M2
(M2
×
3)
A
S102
Note: When removing or
mounting the cover,
take care not to allow the cover
to be stuck to the S102.
take care not to allow the cover
to be stuck to the S102.
screw head
side plate
Click on the first or last page to see other XTL-75V service manuals if exist.