Read Sony XR-CA330 / XR-CA340 Service Manual online
4
XR-CA330/CA340
182 mm
53 mm
Installation
Precautions
•Choose the installation location carefully so that the unit will not interfere with normal driving.
•Avoid installing the unit in areas subject to dust, dirt, excessive vibration, or high temperatures, such as
•Avoid installing the unit in areas subject to dust, dirt, excessive vibration, or high temperatures, such as
in direct sunlight or near heater ducts.
•Use only the supplied mounting hardware for a safe and secure installation.
Mounting angle adjustment
Adjust the mounting angle to less than 20°.
How to detach and attach the front panel
Before installing the unit, detach the front panel.
A To detach
Before detaching the front panel, be sure to press
(OFF). Press (RELEASE), then slide the front panel a
little to the left, and pull it off towards you.
B To attach
Attach part
A of the front panel to part B of the unit as illustrated and push the left side into position
until it clicks.
A
B
Mounting example (Installation in the dashboard)
1
2
3
1
Bend these claws outward for a tight
fit, if necessary.
fit, if necessary.
5
Dashboard
Fire wall
2
3
1
4
max. size M5
×
8 mm
Mounting the unit in a Japanese car
You may not be able to install this unit in some makes of Japanese cars. In such a case, consult your Sony
dealer.
dealer.
TOYOTA
NISSAN
to dashboard/centre console
Existing parts supplied to your car
Bracket
to dashboard/centre console
Bracket
4
max.size M5
×
8 mm
Note
To prevent malfunction, install only with the supplied screws
To prevent malfunction, install only with the supplied screws
4.
Existing parts supplied to your car
4
max. size M5
×
8 mm
4
max. size M5
×
8 mm
First attach
5 to the unit, then insert the unit into 1.
(OFF)
(RELEASE)
Bracket
B
A
With the UP marking up
Bracket
(XR-CA340 only)
Click on the first or last page to see other XR-CA330 / XR-CA340 service manuals if exist.