XR-C6090R, XR-C6100R - Sony Car Audio Service Manual (repair manual). Page 17

Read Sony XR-C6090R / XR-C6100R Service Manual online

– 17 –
FM Stereo Separation Adjustment
Setting:
[SOURCE]
 button: FM
Procedure:
1. Tuner the 98.00 MHz.
2. The then output level is supposing that (A) dB.
3. Adjust with the volume RV3 on TU1 so that the output level is
(A) –32 ± 2 dB then signal generator input set to –20 dB.
Adjustment Location: See page 19.
FM Stereo
Level meter
Level meter
signal generator
connection
reading (dB)
output channel
L-CH
L-CH
A
B
R-CH
L-CH
Adjust RV4 on TU1
for minimum reading.
R-CH
R-CH
C
D
L-CH
R-CH
Adjust RV4 on TU1
for minimum reading.
Procedure:
L-CH Stereo separation: A-B
R-CH Stereo separation: C-D
The separations of both channels should be equal.
Specification: Separation more than 30 dB
Adjustment Location: See page 19.
FM RF signal
generator
Carrier frequency : 98.00 MHz
Output level
: 60 dB (1 mV)
Mode
: stereo
Modulation
: 1 kHz, 75 kHz deviation (100%)
0.01 
µ
F
set
antenna jack (J1)
+
speaker out terminal
level meter
FM RF signal
generator
Carrier frequency : 98.0 MHz
Output level
: 70 dB (3.2 mV)
Mode
: stereo
Modulation
: main: 1 kHz, 20 kHz deviation (26.7%)
  sub: 1 kHz, 20 kHz deviation (26.7%)
:
 19 kHz pilot: 7.5 kHz deviation (10%)
0.01 
µ
F
set
antenna jack (J1)
+
speaker out terminal
level meter
FM Noise Focus Adjustment
Setting:
[SOURCE]
 button: FM
FM Signal Meter Adjustment
Setting:
[SOURCE]
 button: FM
Procedure:
1. Set to the test mode. (See page 15.)
2. Push the 
[SOURCE]
 button and set to FM.
Display
3. Push the 
[6]
 button.
4. Adjust RV1 so that the display indication is “160”.
Display
Specification: Display indication: 158 to 162
Adjustment Location: See page 19.
FM RF signal
generator
Carrier frequency : 98.00 MHz
Output level
: 35 dB (56.2 
µ
V)
Mode
: mono
Modulation
: no modulation
0.01 
µ
F
set
antenna jack (J1)
INTRO
FM
FM
INTRO
REG
Page of 39
Display

Click on the first or last page to see other XR-C6090R / XR-C6100R service manuals if exist.