XR-1300R, XR-2300R, XR-C2300R - Sony Car Audio Service Manual (repair manual). Page 12

12

Mode

Tension Meter

Meter Reading

Forward

CQ-403A

more than 5.89 mN•m

(more than 60 g)

Reverse

CQ-403R

(more than 2.12 oz)

1. Clean the following parts with a denatured-alcohol-moistened

swab:

playback head

pinch roller

rubber belt

capstan

idler

2. Demagnetize the playback head with a head demagnetizer.
3. Do not use a magnetized screwdriver for the adjustments.
4. The adjustments should be performed with the power supply

voltage (14.4 V) unless otherwise noted.

Mode

Torque Meter

Meter Reading

2.46 – 5.39 mN•m

Forward

CQ-102C

(25 – 55 g•cm)

(0.35 – 0.76 oz•inch)

Forward

0.15 – 0.39 mN•m

CQ-102C

(1.5 – 4 g•cm)

Back Tension

(0.02 – 0.06 oz•inch)

2.46 – 5.39 mN•m

Reverse

CQ-102RC

(25 – 55 g•cm)

(0.35 – 0.76 oz•inch)

Reverse

0.15– 0.39 mN•m

CQ-102RC

(1.5 – 4 g•cm)

Back Tension

(0.02 – 0.06 oz•inch)

4.91 – 14.70 mN•m

FF, REW

CQ-201B

(50 – 150 g•cm)

(0.69 – 2.08 oz•inch)

This set have the test mode function. In the test mode, FM Auto
Seek/Stop Level, FM RDS S-Meter adjustments and MW Auto
Seek/Stop Level check can be performed easier than it in ordinary
procedure.

<Set the Test Mode>
1. Turn ON the regulated power supply. (All LEDs on the set

lights up, and the clock is displayed.)

 Press the 

[OFF]

 button, if the clock is not displayed.

2. Push the preset 

[4]

 button.

3. Push the preset 

[5]

 button.

4. Press the preset 

[1]

 button for more than two seconds.

5. Then the display indicates all lights, the test mode is set.

<Release the Test mode>
1. Push the 

[OFF]

 button.