XAV-V630BT - Sony Car Audio Service Manual (repair manual). Page 5

3.  Processing  After the Destination Setting
Be sure to unsolder the SL001 on the MAIN board after doing the 
destination setting.

Note: Be sure to unsoleder the SL001 on the MAIN board.
 

If you do not unsolder, this unit is not operated correctly.

4. Confi rmation After Destination Setting
Execute the following operation after completing the destination 
setting, and confi rm a correct destination was set.

Destination setting checking method:
1.  Press the reset button on the main unit.

2.  Press the [OFF] button on the remote commander.
3.  In the state of source off (Home screen is displayed), enter the 

test mode by pressing the buttons on the remote commander in 
order of the [4] t [5] t [0] (press only the [0] button for two 

seconds).

4.  The following screen is displayed and confi rm that item of the 

destination has been rewritten correctly.

 

(Displayed characters/values in the following fi gure  are  ex-
ample)

<Test Mode>

  1.AUDIO FACTORY MODE

  2.AUDIO DEBUG MODE

  4.VISUAL FACTORY MODE

  6.DESTINATION SETTING MODE

DEST: EUR                      REGION: 2
MCU: SONY-ST06-150721
Graphic: SONY-TW06-150721
Mecha: SONY-SP02-150721
Servo: HI6CD1-BBA-893D
BT: H28004-V2R133-20001 / XAV-V630BT
BT Addr: 001753767368

5.  The resetting operation is executed by pressing the reset button 

after the confi rming ends, and the unit returns to the normal 
condition.